Wheel hub / centre covers
Wheel hub / centre covers
Author
Discussion

shadowfax

Original Poster:

1,104 posts

270 months

Tuesday 11th April 2006
quotequote all
with 'tvr' on, held on by the small bolt that needs the key. Anyone know how much these are to replace and if there are any alternatives? Lost one today

sam gamgee

966 posts

282 months

Tuesday 11th April 2006
quotequote all
Hi. There is a place in Blackpool, I think by the name of Oz computers. Sure Ive seen them there.....BTW, I also need a couple (mine cracked,not gone walkies) and as I recall they were only available as a set. Will share cost if this is case and you are interested.

Dave. (live chorley area)

shadowfax

Original Poster:

1,104 posts

270 months

Tuesday 11th April 2006
quotequote all
Dave - well, would you believe the thing fell off after a visit to Tunit.....?

do dee do do

Will search OZ computers. They are 'OZ' wheels, too aint theyon the Griffs? 7 spoke alloys

shadowfax

Original Poster:

1,104 posts

270 months

Tuesday 11th April 2006
quotequote all
Dave - Found this:

https://www.computermarket.com/mall/3933C3

That "6 available" actually seems to mean they're £17.63 EACH

Tried to order but link aint working so have sent separate email.

At that price, I'll be buying just the one and will repair my cracked ones & secure with araldite to the backing plate from which mine seems to have been loosened after the dyno. The guys at Tunit reckon the rear left caliper was sticking during the dyno test, causing the sparks I spotted flying off when he was at around 5ooo+ rpm. Noticed the centre had gone awol when I got to the end of the M58 after cruising home from Chorley and stopped to test the wheel temps and both rears were cool. And yet, in another way, uncool too

sam gamgee

966 posts

282 months

Friday 14th April 2006
quotequote all
shadowfax said:
Dave - Found this:

https://www.computermarket.com/mall/3933C3

That "6 available" actually seems to mean they're £17.63 EACH

Tried to order but link aint working so have sent separate email.

At that price, I'll be buying just the one and will repair my cracked ones & secure with araldite to the backing plate from which mine seems to have been loosened after the dyno. The guys at Tunit reckon the rear left caliper was sticking during the dyno test, causing the sparks I spotted flying off when he was at around 5ooo+ rpm. Noticed the centre had gone awol when I got to the end of the M58 after cruising home from Chorley and stopped to test the wheel temps and both rears were cool. And yet, in another way, uncool too



Blimey!
Soz took so long to reply, been away till now....Yawn....ta for info, knew I`d seen em somewhere! Keep meaning to replace my two rear ones. Did originally (a year ago!!!)order (and paid the dosh) from gorners....now gone. Hey ho!

See you around with bluey (me got a blue one, too)

Dave.