4.0 V8 Stalling Problem - Any ideas?
Discussion
Came on to post a problem, and saw a similar thread on Chimaera page.
But wondered if a general TVR thread might throw up something different.
Barbie is a Chimaera 4.0, but she has started stalling, coming off a steady throttle to a halt.
If I blip the throttle before it stalls it settles to a perfect idle.
But if I just come off a steady throttle, it will stall between third and second, or as I draw to a standstill.
Otherwise running fantastic.
I have cleaned the stepper motor thingy, and checked all leads etc and nothing obvious.
My "guess" was fuel starvation, or vapouristation, but I will certainly check the electrical tips mentioned on the other thread.
Any other ideas?
Regards
But wondered if a general TVR thread might throw up something different.
Barbie is a Chimaera 4.0, but she has started stalling, coming off a steady throttle to a halt.
If I blip the throttle before it stalls it settles to a perfect idle.
But if I just come off a steady throttle, it will stall between third and second, or as I draw to a standstill.
Otherwise running fantastic.
I have cleaned the stepper motor thingy, and checked all leads etc and nothing obvious.
My "guess" was fuel starvation, or vapouristation, but I will certainly check the electrical tips mentioned on the other thread.
Any other ideas?
Regards
emley said:
Came on to post a problem, and saw a similar thread on Chimaera page.
But wondered if a general TVR thread might throw up something different.
Barbie is a Chimaera 4.0, but she has started stalling, coming off a steady throttle to a halt.
If I blip the throttle before it stalls it settles to a perfect idle.
But if I just come off a steady throttle, it will stall between third and second, or as I draw to a standstill.
Otherwise running fantastic.
I have cleaned the stepper motor thingy, and checked all leads etc and nothing obvious.
My "guess" was fuel starvation, or vapouristation, but I will certainly check the electrical tips mentioned on the other thread.
Any other ideas?
Regards
But wondered if a general TVR thread might throw up something different.
Barbie is a Chimaera 4.0, but she has started stalling, coming off a steady throttle to a halt.
If I blip the throttle before it stalls it settles to a perfect idle.
But if I just come off a steady throttle, it will stall between third and second, or as I draw to a standstill.
Otherwise running fantastic.
I have cleaned the stepper motor thingy, and checked all leads etc and nothing obvious.
My "guess" was fuel starvation, or vapouristation, but I will certainly check the electrical tips mentioned on the other thread.
Any other ideas?
Regards
Check the battery as well, mine was doing the same thing, turned out to be a dodgy battery
Nuggs said:
I think mine would protest if I called it 'Barbie'
Not if she was finished in glittery "Hot Pink" metalflake
Actually she is quite stunning in the sunshine.
The humble little 4.0 generated a lot more interest on the Prom at Blackpool than much more exotic machinery.
Little girls find her especially attractive
I also have some nice little puppies at home, if you would like to see them
Sorry

Gassing Station | General TVR Stuff & Gossip | Top of Page | What's New | My Stuff





