Adjusting TVR Doors

[hondacr84]

Hi All,

Ive owned a T350t for about 2.5 years now. I've noticed that the passanger door has dropped down and has started to wear off the paint work - reflex charcoal!!

Can you shed some light on how you adjust the height levels of the doors

Cheers
Jon

[eburacum]

the exact same thing happened to my sagaris,i was lucky enough to get the doors adjusted and the bodywork re sprayed on warranty at bristol avenue about a week before the factory shut.gerbil who goes on this website who is ex paint shop manager at tvr sorted me out,of which i cant thank enough to this day,speak to him(very approachable) he may be able to put you in the right direction and will be able to help you out with getting some paint too.
regards wayne

[hiltonig]

anyone got a contact for Gerbil ?, many thanks

Edited by hiltonig on Friday 23 February 16:59

[dannyboy1]

Hi There ,I use to work at the factory before it sadly went into administration,Anyway, So to adjust your doors ,you need to move the striker down a touch!The only problem you have is you need a special tool to loosen it off with first of all(they were made in house for us)then knock it down a touch and tighten up. On some occasions we would have to loosen off the top hinge using a ball ended 6mm allen key socket(located behind the carpet just under the dash) and slightly lift the door its self. I hope this helps!!!

[hondacr84]

Thanks for all the advice. I will now tackle this next weekend