Chim Speedo Transducer??

[Blues]

Does anyone have a pic of this in situ?

Before i start deconstructing the undercarriage of my car, i need some comfort that i can find the little blighter.

Should it be visible from the nearside wheelarch

Many thanks


ETA
Just found it on the drivers side
now just need to get it out!

Edited by Blues on Saturday 10th May 11:56

[the man]

Blues said:

Does anyone have a pic of this in situ?

Before i start deconstructing the undercarriage of my car, i need some comfort that i can find the little blighter.

Should it be visible from the nearside wheelarch

Many thanks


ETA
Just found it on the drivers side
now just need to get it out!

Edited by Blues on Saturday 10th May 11:56

Just unbolt the alley bracket that is held on by 2 13mm headed bolts and you then un clip the wiring block. When the bracket is off you will see the adjuster nuts. when the sensor is refitted set the gap between the sensor and the diff to 8 thou with a feeler guage if it is the older thick sensor.

[Blues]

Cheers for that.
I did manage to remove teh alloy bracket that holds the transducer, but now i just cannot reomve teh transducer from it. I have managed to undo the locking nut, but the brass transducer is locked solid.

I have heated it - nothing, and it has been soaking in penetrating oil all night - still no movement. TBH i'm getting very fed up with it!

Still, i'll leave it in teh oil and we'll see how it is tomorrow!