Trying to identify TVR Brembo calipers
Discussion
I've just bought some Brembo calipers as an upgrade on my rally car.
The guy selling them said they were rear calipers (although there is no parking brake facility). They are 4 piston, alloy, black anodised and have the TVR logo printed on the front in white. I'm not too sure of the disc diameter, probably about 300mm-ish and 24mm wide.
The only other identifying mark is BREMBO cast on the back and part numbers 20.4525.00 and 20.4524.00 on the inner and outer housings.
I'd like to know what they're off so I can sort out some brake pads for them!
Any ideas chaps?
The guy selling them said they were rear calipers (although there is no parking brake facility). They are 4 piston, alloy, black anodised and have the TVR logo printed on the front in white. I'm not too sure of the disc diameter, probably about 300mm-ish and 24mm wide.
The only other identifying mark is BREMBO cast on the back and part numbers 20.4525.00 and 20.4524.00 on the inner and outer housings.
I'd like to know what they're off so I can sort out some brake pads for them!
Any ideas chaps?
Not a Cerb' as far as I'm aware they all used AP Racing calipers.
I believe the Tuscans also used AP Racing brakes.
Not sure about the Sagaris.
Could still be rears as the handbrake could be shoes and cable operated.
Not a lot of help but may narrow it down a little.
Tim
I believe the Tuscans also used AP Racing brakes.
Not sure about the Sagaris.
Could still be rears as the handbrake could be shoes and cable operated.
Not a lot of help but may narrow it down a little.
Tim
Edited by TT Tim on Monday 26th May 22:11
Gassing Station | General TVR Stuff & Gossip | Top of Page | What's New | My Stuff