4 wheel geometry nr Goodwood

[k77-widow maker]

Can anyone recommend a garage nr to Goodwood / Chicester (Worthing is too far btw), who can check / adjust castor / camber etc?

The reason i ask is that i have finally got the new wheels on and am not sure if the geometry is going to be the same as with the previous wheels.

Oh and did I mention the griff and I are on the Bookatrack day at Goodwood this saturday, and it would be nice to know if there is somewhere nearby who can set the car up if it's misbehaving.

Do Mithrill racing have the facilities maybe?

[T88CAN]

k77-widow maker said:

Do Mithrill racing have the facilities maybe?

IIRC Mithrill are just a "corperate events organisation" You could always try Fernies or if you want to goe a little further Racing Green have some high tech kit, no doubt you will get a few posts about them Tony

[k77-widow maker]

i thought Mithrill had a share in the garage on the circuit, hence why i used the name.

The last track day i did down there, and brand new jag dissappeared into the garages (the sheds at the end of the lavant straight, NOT the pits!!) there after it started billowing white smoke, which was funny for 2 reasons;

1)it got the marshalls in a state of panic, and they forgot to call us all in when our session was up, giving us a extra 5 - 10 mins on the circuit.

2) it's nice to know that jags break down too, alas they don't get the bad reputation these days that TVR's do it seems!

>> Edited by k77-widow maker on Tuesday 3rd February 22:02

[julianhj]

Austec Racing in Crawley can sort you out.

[Big Al.]

Why was Worthing too far?

[k77-widow maker]

i'm looking for somewhere close so i can get it sorted over lunchtime, without missing too many sessions of the trackday. Worthing will be about 20 mins each way, plus adjustment time.

[evo]

If you're down at Goodwood this weekend I may pop the Chims head in and see whats going on. Any other TVRS or just your car....

Even if you could make worthing in 20 mins, you'd be there for at least an hour setting it up...

Take a day off and get it done before hand.....