tvr tasmin body removal

[fustrated]

Any one done this as i seem to have removed all fastenigs but still wont come off!!!!!!!

[Oldandslow]

I'd say you missed some

Sorry, not helping.

Edited by Oldandslow on Thursday 4th March 18:21

[Graham]

from memory there are two bolts at the front, the door hinges, two plates either side on either end of the outriggers, two bolts at the rear, and then things like the seatbelt bolts..


is it stuck anywhere particular or will it not move at all.. I assume you've taken things like the steering column, handbrake, etc off

G

[grahamw48]

Ask on the Wedge forum.

[Tasmindevil]

Removed mine recently, not sure if there is variance between the models but mine was a 400SE

Starting at the back
2 x along the rear of the chassis behind the diff

Each side has
2 x just in front of the rear wheel arch
1 x seat belt bolts on the centre transmission tunnel
2 x each side, rear and front of the main chassis mounting plates inside the outriggers
1 x inside in the foot well next to the transmission tunnel
2 x small bolts inside the engine bay next to the front inner wheel arch
2 x in front of the radiator

Plus the usual
Steering
Brake/Clutch pipes
Earth straps (Front/Rear)
Handbrake
Gearbox reverse switch etc etc

I think that covers it, others may help, wedge forum is the place to go

Cheers

[mightymouse]

Wedge forum is best place to ask as several people have done it and I know of at least one that is still waiting to go back on (I think)
You haven't forgotten something like an earth strap or a heater cable .
Oh..... plus you will need some helpful bods to lift it