Making an Exhaust

[WorAl]

who's the chap that made the exhaust for the AJP Griff?? where did you get the tubing from and which pipe bending machine do you use?

Cheers for any info.

Yes I want to make my own

[markreilly]

Clive F perhaps ?

Edited by markreilly on Wednesday 28th April 09:51

[Adrenochrome]

Yep Clive F and it's a work of art

[LordGrover]

I think there may be a bit more involved that getting some tube and a pipe bender.

[WorAl]

LordGrover said:

I think there may be a bit more involved that getting some tube and a pipe bender.

I know that, but this is for Mitsubishi Colt and my project when it gets up and running, not bothered about it being a work of art, just practical. (Mitsubishi to practice on though

[Pasco]

WorAl said:

LordGrover said:

I think there may be a bit more involved that getting some tube and a pipe bender.

I know that, but this is for Mitsubishi Colt and my project when it gets up and running, not bothered about it being a work of art, just practical. (Mitsubishi to practice on though

Give Clive a shout im sure he will build you one for around 3k

[WorAl]

Pasco said:

Give Clive a shout im sure he will build you one for around 3k

£3k, only £250 from powerflow for Mitsu and a custom one from AAS is going to be about £2k for the project.

[rev-erend]

Al,

I made my own 4 into 1 manifolds for my TVR:

http://www.pistonheads.co.uk/gassing/topic.asp?h=0...

You can buy the bends from JP Exhausts in Macclesfield. They have very reasonable prices.

Edited by rev-erend on Wednesday 28th April 12:25

[clive f]

hi Al, as rev says buy your bends and cut to suit whatever angle you require, much cheaper than getting your own tubes mandrel bent, you just need to work out what you want it to do, and from that you`ll work out what pipe sizes to make it from.

I hope you are a patient man

[clive f]

WorAl said:

Pasco said:

Give Clive a shout im sure he will build you one for around 3k

£3k, only £250 from powerflow for Mitsu and a custom one from AAS is going to be about £2k for the project.

if its only £250 for a mitsu one, I wouldn`t waste your time trying to make it yourself to be honest mate.

[peteA]

WorAl said:

Pasco said:

Give Clive a shout im sure he will build you one for around 3k

£3k, only £250 from powerflow for Mitsu and a custom one from AAS is going to be about £2k for the project.

Hi Al

Hope you are well mate - misse you at Chatsworth! Mine was the only Cerb travelling down from the north!

You need to watch American Hotrod on the quest channel for a few ideas - they make their own exhausts for the Boyd coddington machines...just a thought!


Hopefully see you soon - you going to fastlane 2010?

[WorAl]

peteA said:

WorAl said:

Pasco said:

Give Clive a shout im sure he will build you one for around 3k

£3k, only £250 from powerflow for Mitsu and a custom one from AAS is going to be about £2k for the project.

Hi Al

Hope you are well mate - misse you at Chatsworth! Mine was the only Cerb travelling down from the north!

You need to watch American Hotrod on the quest channel for a few ideas - they make their own exhausts for the Boyd coddington machines...just a thought!


Hopefully see you soon - you going to fastlane 2010?

Alright Pete, yeah couldn't make Chatsworth unfortunately, wish I could have.
Will have to get that show watched then, just fancy it as a project you know.

Yes will be at Fastlane, have signed up on TVRCC for it, hope weather is good as last year.