Vehicle body mold makers

[RJDM3]

As per the title, does anyone know any companies in the uk that can do a high quality job? Any recommendations?

Thanks

[jimroyale]

www.spacecomposites.co.uk

Ex-TVR Development staff. Did Peter Wheelers 5000m body mods, tooling and body manufacture.

01772690900

[V8 GRF]

Surface and Design in Blackpool. Several of the team there where mould makers, designers and styling buck creators at TVR.

www.surfaceanddesign.com

[Wildfire]

Fibreon

http://www.damagedtvrs.co.uk/

[RJDM3]

Thanks guys. Appreciate it.

If anyone know of any others let me know.

Thanks

[potato muncher]

jimroyale said:

www.spacecomposites.co.uk

Ex-TVR Development staff. Did Peter Wheelers 5000m body mods, tooling and body manufacture.

01772690900

Please do not forget who made the master for this.

[RJDM3]

Why who did the master?

[markreilly]

RJDM3 said:

Why who did the master?

err,Surface and Design......

[jimroyale]

potato muncher said:

jimroyale said:

www.spacecomposites.co.uk

Ex-TVR Development staff. Did Peter Wheelers 5000m body mods, tooling and body manufacture.

01772690900

Please do not forget who made the master for this.

Not that it really matters but, to my recollection at least S and D only surfaced and primed the master.

[potato muncher]

jimroyale said:

potato muncher said:

jimroyale said:

www.spacecomposites.co.uk

Ex-TVR Development staff. Did Peter Wheelers 5000m body mods, tooling and body manufacture.

01772690900

Please do not forget who made the master for this.

Not that it really matters but, to my recollection at least S and D only surfaced and primed the master.

spacecomposites made a mould and body off what s & d had created, please explain what only surfaced and primed means.

[jimroyale]

potato muncher said:

jimroyale said:

potato muncher said:

jimroyale said:

www.spacecomposites.co.uk

Ex-TVR Development staff. Did Peter Wheelers 5000m body mods, tooling and body manufacture.

01772690900

Please do not forget who made the master for this.

Not that it really matters but, to my recollection at least S and D only surfaced and primed the master.

spacecomposites made a mould and body off what s & d had created, please explain what only surfaced and primed means.

Malcom, Ask old Dave or Mick to fill you in with the details.

[potato muncher]

jimroyale said:

potato muncher said:

jimroyale said:

potato muncher said:

jimroyale said:

www.spacecomposites.co.uk

Ex-TVR Development staff. Did Peter Wheelers 5000m body mods, tooling and body manufacture.

01772690900

Please do not forget who made the master for this.

Not that it really matters but, to my recollection at least S and D only surfaced and primed the master.

spacecomposites made a mould and body off what s & d had created, please explain what only surfaced and primed means.

Malcom, Ask old Dave or Mick to fill you in with the details.

I do not need to ask old dave or mick as I was there and working on it, and there were a lot more mods than surfacing and priming.

[jimroyale]

potato muncher said:

jimroyale said:

potato muncher said:

jimroyale said:

potato muncher said:

jimroyale said:

www.spacecomposites.co.uk

Ex-TVR Development staff. Did Peter Wheelers 5000m body mods, tooling and body manufacture.

01772690900

Please do not forget who made the master for this.

Not that it really matters but, to my recollection at least S and D only surfaced and primed the master.

spacecomposites made a mould and body off what s & d had created, please explain what only surfaced and primed means.

Malcom, Ask old Dave or Mick to fill you in with the details.

I do not need to ask old dave or mick as I was there and working on it, and there were a lot more mods than surfacing and priming.

Considering that myself and Guy widened/lenghtened the body and doors, sculpted the flaired arches and mirrored them leaves me a bit confussed as to what your point is. Also, this work was done at the other end of the factory to where you work (as a painter).

[JNR77]

Have a look at these guys - quite impressive; http://www.3dengineers.co.uk/index.html

[potato muncher]

jimroyale said:

potato muncher said:

jimroyale said:

potato muncher said:

jimroyale said:

potato muncher said:

jimroyale said:

www.spacecomposites.co.uk

Ex-TVR Development staff. Did Peter Wheelers 5000m body mods, tooling and body manufacture.

01772690900

Please do not forget who made the master for this.

Not that it really matters but, to my recollection at least S and D only surfaced and primed the master.

spacecomposites made a mould and body off what s & d had created, please explain what only surfaced and primed means.

Malcom, Ask old Dave or Mick to fill you in with the details.

I do not need to ask old dave or mick as I was there and working on it, and there were a lot more mods than surfacing and priming.

Considering that myself and Guy widened/lenghtened the body and doors, sculpted the flaired arches and mirrored them leaves me a bit confussed as to what your point is. Also, this work was done at the other end of the factory to where you work (as a painter).

Sorry this thread seems to have been highjacked by a Knobhead, I do not know how you got my no, but I am that scared that I am going for a check wipe.
To go back to the original question, SpaceComposites are a top development and mould making organisation, you only have to look at the scammander to see the quality and I was in no way having a go at them.

[jimroyale]

potato muncher said:

jimroyale said:

potato muncher said:

jimroyale said:

potato muncher said:

jimroyale said:

potato muncher said:

jimroyale said:

www.spacecomposites.co.uk

Ex-TVR Development staff. Did Peter Wheelers 5000m body mods, tooling and body manufacture.

01772690900

Please do not forget who made the master for this.

Not that it really matters but, to my recollection at least S and D only surfaced and primed the master.

spacecomposites made a mould and body off what s & d had created, please explain what only surfaced and primed means.

Malcom, Ask old Dave or Mick to fill you in with the details.

I do not need to ask old dave or mick as I was there and working on it, and there were a lot more mods than surfacing and priming.

Considering that myself and Guy widened/lenghtened the body and doors, sculpted the flaired arches and mirrored them leaves me a bit confussed as to what your point is. Also, this work was done at the other end of the factory to where you work (as a painter).

Sorry this thread seems to have been highjacked by a Knobhead, I do not know how you got my no, but I am that scared that I am going for a check wipe.
To go back to the original question, SpaceComposites are a top development and mould making organisation, you only have to look at the scammander to see the quality and I was in no way having a go at them.

Malc, thanks for that. I'd only like to add that the post was highjacked by two, not one knobhead.

[Barry Gibb]

Any one seen this http://www.youtube.com/watch?v=yekuwD6ZX7A ??

[Poledriver]

WTF was that?

[ianbrown]

Poledriver said:

WTF was that?

Don't know but I need one

[V8 GRF]

That is the Scamander. Peter Wheeler's last project.