Adjustable pushrods anybody?

[dbv8]

My engine is coming along nicely and will be running a bespoke mechanical cam. I have the matching solid lifters and springs etc but need a set of adjustable pushrods for the running in and tune and test period. The aim is to sort out an upgrade to roller rocker gear at a later stage.

Has anyone moved to roller rockers and have a set of adjustable pushrods sat on the shelf? PM me with a price if you have cheers

[spend]

Oh.. replied to you on that other site. Mike should have some tomorrow if UPS doesn't conflict with his weekly (should that be 'regular'?) Saturday morning colonic irrigation classes

[dbv8]

spend said:

Oh.. replied to you on that other site. Mike should have some tomorrow if UPS doesn't conflict with his weekly (should that be 'regular'?) Saturday morning colonic irrigation classes

Hi Dave
no mails in my box on the v8 forum?
Ive give you alternative addresses on there.

Mike was hoping to have my engine ready to pick up today but as of yesterday the cam kit still hadnt arrived!
I am setting off at 11:30 from Portsmouth so if he doesnt call then i am going straight home.... engineless again

If you are sending him some pushrods then thankyou. I can wait another fortnight and have the rocker gear all in and the preloads set ready.
I owe you a few beers at least already

[Pupp]

Can't help on the pushrods I'm afraid but interested in the cam specs... what profile you gone for?

[rev-erend]

No sorry - I've always had adjustable roller rockers.

Kenne Bell and now pep.

[dbv8]

Pupp said:

Can't help on the pushrods I'm afraid but interested in the cam specs... what profile you gone for?

Thanks to advice from Rob the man.
Kent are grinding my cam with 2 of their profiles from different spec cams.
Inlet is 285 degree and exhaust 310 with a 112 LSA.

[Pupp]

dbv8 said:

Pupp said:

Can't help on the pushrods I'm afraid but interested in the cam specs... what profile you gone for?

Thanks to advice from Rob the man.
Kent are grinding my cam with 2 of their profiles from different spec cams.
Inlet is 285 degree and exhaust 310 with a 112 LSA.

That's interesting... any idea on lift?

[dbv8]

Pupp said:

dbv8 said:

Pupp said:

Can't help on the pushrods I'm afraid but interested in the cam specs... what profile you gone for?

Thanks to advice from Rob the man.
Kent are grinding my cam with 2 of their profiles from different spec cams.
Inlet is 285 degree and exhaust 310 with a 112 LSA.

That's interesting... any idea on lift?

12.32 inlet and 13.56 exhaust

[spend]

Sounds like a laxative cam to me

[Pupp]

dbv8 said:

12.32 inlet and 13.56 exhaust

[dbv8]

spend said:

Sounds like a laxative cam to me

to the passenger maybe

[Pupp]

Hope you've got short guides in

[dbv8]

Pupp said:

Hope you've got short guides in

Yup.... bronze ones

[Pupp]

Looks great but was actually thinking about the other end

[dbv8]

Pupp said:

Looks great but was actually thinking about the other end

Yeah i know

here ya go

[Pupp]

Lovely stuff