Custom Pad Shapes
Discussion
Do they have a web site.
Pad shape:
http://www.murraymotorsport.ie/assets/products/378...
Many thanks
Steve
Pad shape:
http://www.murraymotorsport.ie/assets/products/378...
Many thanks
Steve
stevesingo said:
Do they have a web site.
Pad shape:
http://www.murraymotorsport.ie/assets/products/378...
Many thanks
Steve
Not that I know of, best bet is to give them a call!Pad shape:
http://www.murraymotorsport.ie/assets/products/378...
Many thanks
Steve
Nothing in the range I have available here to fit unfortunately.
Brummie who pops up on the forum now and again is a dealer for Carbon Lorraine pads.
Worst case scenario...is there a much larger pad you can have trimmed down to size ?
It's not a complicated shape to have to replicate
http://www.demon-tweeks.co.uk/motorsport/racing-ca...
This could probably be chopped down easily enough
http://www.demon-tweeks.co.uk/motorsport/racing-ca...
Worst case scenario...is there a much larger pad you can have trimmed down to size ?
It's not a complicated shape to have to replicate
http://www.demon-tweeks.co.uk/motorsport/racing-ca...
This could probably be chopped down easily enough
http://www.demon-tweeks.co.uk/motorsport/racing-ca...
Edited by stevieturbo on Wednesday 3rd October 21:10
Stevie,
Carbone Lorraine only produce the pad in RC8+ compound. Probably less road friendly than DS3000 I have now.
Cutting a different pad is something I considered, but I now have a solution. I have drawn up some different pad abutment plates that will allow the use of AP racing CP3215 pad shapes. Just need to get the machined up.
Thanks
Steve
Carbone Lorraine only produce the pad in RC8+ compound. Probably less road friendly than DS3000 I have now.
Cutting a different pad is something I considered, but I now have a solution. I have drawn up some different pad abutment plates that will allow the use of AP racing CP3215 pad shapes. Just need to get the machined up.
Thanks
Steve
Edited by stevesingo on Wednesday 3rd October 21:31
If you need stuff machined, give Ralph at www.componentengineering.co.uk a shout.
He can water jet and all sorts and very keen prices
He can water jet and all sorts and very keen prices
Gassing Station | Suspension, Brakes & Tyres | Top of Page | What's New | My Stuff