Running Non Standard ET Wheels
Discussion
Looking for some wheels for the camper.
The factory spec an ET of 40-45mm, now I've found some with an ET of 35mm.
The pcd, centre bore etc are call correct.
I was thinking the 5mm on the ET will make next to no difference, other than pushing the whell 5mm outboard.
What do others think? Am I missing something.
The factory spec an ET of 40-45mm, now I've found some with an ET of 35mm.
The pcd, centre bore etc are call correct.
I was thinking the 5mm on the ET will make next to no difference, other than pushing the whell 5mm outboard.
What do others think? Am I missing something.
I can't help from a technical perspective but I run no standard ET shells on my griff to get wider rims and more rubber and they are fine. Mine are about 10 off the manufacturers standard. The only thing I found was that the camber had to be changed slightly at the rear to fit the outer shoulder of the tyre in the wheel arch.
Gassing Station | Suspension, Brakes & Tyres | Top of Page | What's New | My Stuff