how to fit these anti roll bar links?
Discussion
I I have these anti roll bar links and they come like this:
As you can see they only come with 2 metal washers and 2 rubber bushes.
I seem to remember the original anti roll bar links had a rubber bush either side of the top bracket. However I don't think this configuration can be right with only 2 metal washers. Surely if it is like this there should also be metal washers in the places I have labelled "no washer" on the photo? Is there something wrong? How should the configuration be?
As you can see they only come with 2 metal washers and 2 rubber bushes.
I seem to remember the original anti roll bar links had a rubber bush either side of the top bracket. However I don't think this configuration can be right with only 2 metal washers. Surely if it is like this there should also be metal washers in the places I have labelled "no washer" on the photo? Is there something wrong? How should the configuration be?
Both sides of both bushes must be supported by a flat surface that covers the whole face of the bush. Those washers look ideal to go between the bush and the nut. I don't see the point of a washer between the bush and the mounting flange if the flange extends beyond the bush, as it seems to in that photo.
Edited by GreenV8S on Saturday 22 July 23:55
Gassing Station | Suspension, Brakes & Tyres | Top of Page | What's New | My Stuff