Stainless Brake Pipe fittings - DIN
Discussion
I'm looking for Stainless Steel brake pipe fittings, specifically male M10 x 1mm for 3/16 pipe for a DIN / ISO bubble flare for my BMW.
I seem to be able to find SAE without issue, but DIN I'm struggling with, other than a handful of suppliers in the US which would end up costing an arm and a leg, mainly due to charges applied to clear any parcel (parcel farce adding £8 for this at the last time of checking).
Does anybody know of any EU suppliers?
I've just emailed automec with the above as they seem like a prominent UK supplier.
The reason for wanting to go stainless is I've got mild steel into stainless brake lines and they have seized, I wanted to try and improve my chances when replacing the pipes by going stainless to stainless fitting with kunifer pipe.
I seem to be able to find SAE without issue, but DIN I'm struggling with, other than a handful of suppliers in the US which would end up costing an arm and a leg, mainly due to charges applied to clear any parcel (parcel farce adding £8 for this at the last time of checking).
Does anybody know of any EU suppliers?
I've just emailed automec with the above as they seem like a prominent UK supplier.
The reason for wanting to go stainless is I've got mild steel into stainless brake lines and they have seized, I wanted to try and improve my chances when replacing the pipes by going stainless to stainless fitting with kunifer pipe.
Gassing Station | Suspension, Brakes & Tyres | Top of Page | What's New | My Stuff