Saxo brake bias valve reset help.

[FussyFez]

My OH has 51 plate spaxo that was bought lowered.

She has been complaining of the rears locking up, and i think the brake bias valve (that ups the rear brake power when the car is fully laden, and therefore riding lower at the back) has not been reset for the lower ride height.

Can anyone help me with reseting it please so i know she's got predictable braking.

Cheers guys.

Edited by FussyFez on Thursday 13th January 18:35

[hugodc]

assuming its in the same place as a 106 if you look around the rear beam on the left hand side you will see the bias valve it is attached to the beam via a bolt threaded into a spring, by adjusting the bolt you can set the bias valve there is a set proceedure other than trial and error for setting it maybe try a 106 or saxo forum or it will be in haynes if you have one

[FussyFez]

Cheers mate ill have a look and see what turns up.