Doing it in the right order
Doing it in the right order
Author
Discussion

dieseluser07

Original Poster:

2,452 posts

146 months

Tuesday 8th August 2017
quotequote all
Going for a full detail on the car tommorow, wanting to do it in the correct order so can anyone advise if im doing it correctly please.

Rinse

Snow foam

Rinse

Hand wash

Rinse

Dry

Clay bar

Rinse

Polish (meguiars ultimate compound)

Glaze (poorboys black hole)

Wax

Is that the correct order in which i should do it??

SantaBarbara

3,244 posts

138 months

Tuesday 8th August 2017
quotequote all
From the top down

Alex_225

7,832 posts

231 months

Tuesday 8th August 2017
quotequote all
The only thing I would say is, don't bother drying it after the first wash. You're only going to clay it and need to re-wash it again anyway, save yourself the trouble. smile

Also, instead of quick detailer use a relatively strong shampoo/water mix for claying.

I always found using quick detailer meant using loads of it and on a warm day the panel drying. Friend of mine who details for a living recommended the water option and it's so much easier. Dip a mitt into the water and let it run down the panel, makes the claying process a lot quicker.

Hope that helps mate.

227bhp

10,203 posts

158 months

Tuesday 8th August 2017
quotequote all
You need a good rinse out between the ears, I don't recall you ever being able to post up in the correct section.

Cold

16,727 posts

120 months

Tuesday 8th August 2017
quotequote all
Isn't the UK due to get torrential rain tomorrow?

Harry H

3,765 posts

186 months

Tuesday 8th August 2017
quotequote all
Cold said:
Isn't the UK due to get torrential rain tomorrow?
Therefore :-


Get in car.

Drive down the road.

Hand those nice hard working Polish blokes a tenner.

Sit back and relax.

Drive home.

Watch telly.

AndySheff

6,932 posts

237 months

Tuesday 8th August 2017
quotequote all
I'd put the black hole on first. (before wax/polish).

Zod

35,295 posts

288 months

Tuesday 8th August 2017
quotequote all
It's a diesel - why bother? hehe

anonymous-user

84 months

Tuesday 8th August 2017
quotequote all
Smooch, squeeze, fingerbang, lickering, vanilla, oxo (shirley)?

getmecoat

hyphen

26,262 posts

120 months

Tuesday 8th August 2017
quotequote all
If you are 'going' for a full detail, let the detailer get on with it...

Silverbullet767

11,323 posts

236 months

Tuesday 8th August 2017
quotequote all
Harry H said:
Cold said:
Isn't the UK due to get torrential rain tomorrow?
Therefore :-


Get in car.

Drive down the road.

Hand those nice hard working Polish blokes a tenner.

Sit back and relax.

Drive home.

Admire all those lovely new swirl marks.
Fixed.

glenrobbo

40,508 posts

180 months

Tuesday 8th August 2017
quotequote all
OpulentBob said:
Smooch, squeeze, fingerbang, lickering, vanilla, oxo (shirley)?

getmecoat
Most eloquently phrased Sir Robert. smile
Except you did omit the cocktails... lick

Would somebody be so kind as to direct the OP to the "Detailing" Section way over there? ----->>

They could do with some extra numbers...


Meanwhile, my advice would be: " Just get a proper car and drive it like you stole it. "

There. Karma is restored once more. cloud9

fido

18,917 posts

285 months

Tuesday 8th August 2017
quotequote all
Too many extra steps.

====


Snow foam

Jet Wash

Hand wash

Rinse

Clay bar

Rinse & Dry

Polish (meguiars ultimate compound)

Glaze (poorboys black hole)

Wax

hacksaw

810 posts

147 months

Tuesday 8th August 2017
quotequote all
My current routine is;

Prewash,
Rinse
Wheels, iron out and clean
Rinse wheels
Snow foam
Rinse
Hand wash
Rinse
Dry
Polish
Wax
Details, (tyre dress, wheel wax, glass cleaner, trim protect)

Polish and wax is only as required, so normally omit these and I can get through the other steps in about 2 hours. Never clay, I send to a detailer for that.

glenrobbo

40,508 posts

180 months

Tuesday 8th August 2017
quotequote all
I do not want to hear another word about that poor boys black hole.

You people disgust me.

dieseluser07

Original Poster:

2,452 posts

146 months

Tuesday 8th August 2017
quotequote all
AndySheff said:
I'd put the black hole on first. (before wax/polish).
It is going on before wax


But before polish? Id just end up polishing it away??

Craikeybaby

12,142 posts

255 months

Tuesday 15th August 2017
quotequote all
How did you get on? Can we see the results?