Scratches...
Author
Discussion

Simpo Two

Original Poster:

91,761 posts

290 months

Yesterday (13:41)
quotequote all
On the subject of 'interior trim restoration', at some time in my car has suffered from somebody with gritty shoes getting in carelessly. The treadplates have a black finish (anodised?) and the grit has cut through to the metal beneath leaving ugly silver scratches.

I'm thinking of a black wax pen or some sort of black paint to rub into the scratches and then wipe off the anodised part - but is there an official way to deal with this (short of a new panel!)?


Mr Squarekins

1,553 posts

87 months

Yesterday (15:07)
quotequote all
Remove, sand, paint.

Or just buy some new ones.

Or buy a new car smile

InitialDave

14,514 posts

144 months

Yesterday (15:11)
quotequote all
If it's anodised, I'd use a black paint pen to fill the scratches and wipe off the excess, to make them less noticeable.

Or paint all of them the same.

Simpo Two

Original Poster:

91,761 posts

290 months

Yesterday (16:35)
quotequote all
I think I like Dave's answer better...! Black paint pen - will any do or are there special expensive detailing ones?

(I have some 'Turtle Wax black chrome trim and bumper polish' but haven't tried it as I thought it might mess up the good bits)

InitialDave

14,514 posts

144 months

Yesterday (18:34)
quotequote all
I'd just use a generic one, it's only to fill the scratches so they don't stand out.

If you're going to use any kind of wax or coating, if you try that first, don't forget the paint probably won't stick into the scratches then, so would need a suitable cleaning to do so.