Tail pipe finishers
Author
Discussion

A5 XKC

Original Poster:

30 posts

235 months

Friday 23rd June 2006
quotequote all
Hi, have an XK8 where the Chrome tailpipes are very black and can't get the clean, have tried autosol without success, any ideas?

Trooper2

6,676 posts

247 months

Friday 23rd June 2006
quotequote all
Elbow grease.

Try your Autosol with some very fine steelwool or try some polishing compound followed by your Autosol to brighten.

Flitz or Brasso will probably work as well.

wildoliver

9,167 posts

232 months

Sunday 25th June 2006
quotequote all
Try a bit of autoglym wheel acid, followed by 2000 Grit wet and dry, then rubbing compount, then t cut then polish.

N.B. If your tailpipes are Chrome DO NOT USE THIS METHOD you will go through the chrome layer.

Jaguarnut

86 posts

233 months

Thursday 29th June 2006
quotequote all
For chrome finishes you could try using normal vinegar and fine wire wool followed by either autoglm metal polish or autosol, still with fine wire wool. Finally cloth polish. If all the suggestions fail, and the tailpipes are just easily changed pipe extensions, try some new ones and regularly polish them with autosol/autoglym to keep them pritine. The issue I believe is a mix of combustion by-products mixing with the condensation formed in the exhaust after start-up. This is a corrosive substance that will over time permanently damage the chrome or alloy. Mine are nice and shiny and I just hate dirty tailpipes!

the preacher

257 posts

275 months

Wednesday 5th July 2006
quotequote all
try peek works well on mine

A5 XKC

Original Poster:

30 posts

235 months

Monday 10th July 2006
quotequote all
Don't want to appear thick, what is peek???