Rebuilt MGA breathing heavily
Author
Discussion

832ark

Original Poster:

1,247 posts

186 months

Saturday 4th March 2017
quotequote all
Hoping someone can help here - we've got an MGA with a motor that's been freshly rebuilt. It seems to run well but is losing a fair amount of oil out of the breather. Also seems to be heading toward overheating when run round town but no issue when out of town.

Many thanks in advance for your input!

texaxile

3,803 posts

180 months

Saturday 4th March 2017
quotequote all
I'd ask this in the "technical" - "engine and drivetrain" area, there's a member there who is an expert on MG engines.

cahami

1,248 posts

236 months

Sunday 5th March 2017
quotequote all

832ark

Original Poster:

1,247 posts

186 months

Sunday 5th March 2017
quotequote all
Thanks, will certainly look into a PCV although that doesn't explain why it's breathing so heavily in the first place.

v8250

2,747 posts

241 months

Sunday 5th March 2017
quotequote all
texaxile said:
I'd ask this in the "technical" - "engine and drivetrain" area, there's a member there who is an expert on MG engines.
Yes, that's Peter Burgess. Peter can be contacted via PH or here http://www.mg-cars.org.uk/peterburgess/

832ark, do contact Peter if you've yet to find the fault, he's highly respected within MG circles and is also a very good person to deal with.

cahami

1,248 posts

236 months

Sunday 5th March 2017
quotequote all
832ark said:
Thanks, will certainly look into a PCV although that doesn't explain why it's breathing so heavily in the first place.
Have you done a compression test ?.

Dogwatch

6,384 posts

252 months

Sunday 5th March 2017
quotequote all
Does sound as if there is a build-up of pressure in the crankcase.

Riley Blue

23,205 posts

256 months

Sunday 5th March 2017
quotequote all
v8250 said:
texaxile said:
I'd ask this in the "technical" - "engine and drivetrain" area, there's a member there who is an expert on MG engines.
Yes, that's Peter Burgess. Peter can be contacted via PH or here http://www.mg-cars.org.uk/peterburgess/

832ark, do contact Peter if you've yet to find the fault, he's highly respected within MG circles and is also a very good person to deal with.
I can recommend Peter too. He worked on a head for my Riley 1.5. He did a great job and is very knowledgeable.

iSore

4,011 posts

174 months

Tuesday 7th March 2017
quotequote all
20+ years ago someone I knew had a 1970 MGB with the same problem. It stank of crankcase fumes but went well. Its was the CCV system - once sorted it was fine and used the usual BL pint of oil/1000 miles.

RichB

56,399 posts

314 months

Tuesday 7th March 2017
quotequote all
iSore said:
20+ years ago someone I knew had a 1970 MGB with the same problem. It stank of crankcase fumes but went well. Its was the CCV system - once sorted it was fine and used the usual BL pint of oil/1000 miles.
MGA doesn't have CCV though. It should just be a breather out the top of the rocker cover.