Help identify flywheel

[MKnight702]

Hi all, I purchased this flywheel many years ago to fit on a 1275 A series, however it didn't fit so it sits in my garage gathering dust. I have decided to try and sell it to someone who can make use of it, but to do that it would be really helpful to know what it's for! Can anyone help?

As best as I can make out it is 10 1/4" overall diameter, mounting holes pcd is 2 1/4", central hole is 1 1/2" and clutch is 7 1/4".

[MKnight702]

[tones61]

Online A series?
Poss midget,minor,marina ? :-)

[tones61]

Inline A series?
Poss midget,minor,marina ? :-)

[Tyre Smoke]

Looks like Ford Crossflow to me. But the last time I saw a crossflow flywheel was decades ago.

[MKnight702]

tones61 said:

Inline A series?
Poss midget,minor,marina ? :-)

Unfortunately not, that is why I purchased it but it doesn't fit.

[Oneball]

Unusual looking ringgear. Count the teeth and see if that number comes up with anything on Google.

[MKnight702]

Oneball said:

Unusual looking ringgear. Count the teeth and see if that number comes up with anything on Google.

I make it 102 teeth.

[MKnight702]

With a bit of Googlefoo I believe it may be from a 1098cc Morris Minor. Can anyone confirm?

Edited to add, further investigation says not 1098, I believe that they only have 4 flywheel bolts.

Edited by MKnight702 on Wednesday 9th February 08:40

[austina35]

1098 minor would be 4 bolt crank.

It is likely from a midget or marina. Marina flywheel doesn't fit the midget crank and vice versa. It's to do with the dowls and the circular 'step' around the crank bolt holes.

Where are you located?

[MKnight702]

austina35 said:

1098 minor would be 4 bolt crank.

It is likely from a midget or marina. Marina flywheel doesn't fit the midget crank and vice versa. It's to do with the dowls and the circular 'step' around the crank bolt holes.

Where are you located?

I am based in Huntingdon. Thanks for confirming about the 1098 crank.

[Dastardly Dick]

austina35 said:

1098 minor would be 4 bolt crank.

It is likely from a midget or marina. Marina flywheel doesn't fit the midget crank and vice versa. It's to do with the dowls and the circular 'step' around the crank bolt holes.

Where are you located?

That dowel sparks a memory in my mind from my old marina which was taken apart many times, may just be that though a memory and a wrong un at that.