Removing Wheel Clamps
Discussion
I remember seeing a website a while ago about how to move lots of different kinds of wheel clamps.
I can't find it now though and I think sooner or later I may have to remove a clamp.
It will be that kind of clamp. Will use an angle grinder if I have to but would much rather remove it by other means.
I can't find it now though and I think sooner or later I may have to remove a clamp.
It will be that kind of clamp. Will use an angle grinder if I have to but would much rather remove it by other means.
That looks like a "London Police Clamp". I've seen an article that describes how to remove it.
The gist of it is that you jack the wheel up and let the tyre down, then enables you to pry the clamp back far enough to release the wheel nuts with a ring spanner. Might be rather harder if you have an alloy wheel with recessed wheel nuts, but worth a try. I think this technique leaves the wheel locked in the clamp, if that's a problem?
The gist of it is that you jack the wheel up and let the tyre down, then enables you to pry the clamp back far enough to release the wheel nuts with a ring spanner. Might be rather harder if you have an alloy wheel with recessed wheel nuts, but worth a try. I think this technique leaves the wheel locked in the clamp, if that's a problem?
Gassing Station | The Pie & Piston Archive | Top of Page | What's New | My Stuff



