Garage Door Problem
Author
Discussion

uuf361

Original Poster:

3,185 posts

253 months

Friday 17th March 2006
quotequote all
Ok guys, so here's the problem and try and bear with me while i explain.

I moved back into my house a year ago (almost to the day in fact) and had a guy (ex-colleague of a family friend)install an alarm (which is fine) and also an electric garage door opener (I'm lazy)

He was going to use the existing garage door and fitted a motor which worked fine but due to the door type it could not fully lift the door. This was in March and he went away to find some solutions. Up until now I have also had the garage full of someone else's stuff which is bieng moved out today so I was not so bothered about it not working.

In the intervening 12 months he has not been in contact very often, but did bring round some sort of arm to fit at a later date which he hasn't but it's still in the garage on the floor. I have paid for any of his time BTW.

I am now wanting to get the door working and have left about a dozen voicemails/texts for the guy and even wrote him a very polite letter saying at the very least oculd I have my keys back and for him to let me know if he wanted to continue doing the job or not. This was sent recorded and 3 weeks on no response.

I still have the motor but not the remotes (he kept them) the door does not work electrically and I don't have my keys back

What should I do ? Am beginning to get more than a little frustrated and think I have (at a whole year) been rather patient!

>> Edited by uuf361 on Saturday 18th March 09:26

>> Edited by uuf361 on Saturday 18th March 09:26

uuf361

Original Poster:

3,185 posts

253 months

Saturday 18th March 2006
quotequote all
Forgot to mention that if anyone knows anyone around the Gatwick area who can make normal garage doors electric can you put me in touch with them ?

DocJock

8,722 posts

271 months

Saturday 18th March 2006
quotequote all
B&Q sell a kit which takes less than an hour to fit yourself.

Incredibly inexpensive, simple and reliable. Extra remotes sold seperately as well.

kippax

2,792 posts

280 months

Saturday 18th March 2006
quotequote all
DocJock said:
B&Q sell a kit which takes less than an hour to fit yourself.

Incredibly inexpensive, simple and reliable. Extra remotes sold seperately as well.


Glad someone else keeps recommending B&Q otherwise I could get done for advertising!

H

CombeMarshal

2,030 posts

257 months

Saturday 18th March 2006
quotequote all
Whats the problem, is the motor not powerful enough or it the door fouling the mechanism?

If you got his address can you not go and visit him, or is he bigger than you!

uuf361

Original Poster:

3,185 posts

253 months

Saturday 18th March 2006
quotequote all
DocJock said:
B&Q sell a kit which takes less than an hour to fit yourself.

Incredibly inexpensive, simple and reliable. Extra remotes sold seperately as well.


The big problem with that is the 'Do it Myself' bit - you would not want to see my efforts and I wouldn't have a clue where to start.......I already have the motor in place though (albeit it without remotes) so could I get extra remotes and thenecessary bits and get a guy to fix it using the existing equipment or would I need to start from scratch ?

CombeMarshal

2,030 posts

257 months

Saturday 18th March 2006
quotequote all
You should be able to get remotes, I've done a few car park barriers and the remotes are programmed to the barrier, You'll need the instructions too as you have to normally push buttons inside the unit.
What make and model is it?

uuf361

Original Poster:

3,185 posts

253 months

Saturday 18th March 2006
quotequote all
And that's where the problems will start. No instructions as the guy who will no longer contact me has them along with the remotes. Just been to look at it and the make looks like BFI - no model number that I can see.

Ribol

12,000 posts

289 months

Saturday 18th March 2006
quotequote all
As well as remotes these door openers are usually wired to work with a wired switch as well. Why not try it with a switch first and worry about the remotes later if it all works.

uuf361

Original Poster:

3,185 posts

253 months

Saturday 18th March 2006
quotequote all
The motor installed actually works, I have seen a demonsstration!

The problem is that it is not 'attached' to the door bcos it does not have the required pull to completley lift it and gets stuck - this is due (from my recollection) to the construction of the door runners. This is when the guy commissioned some sort of arm to overcome the problem. I have the arm and the motor should still work (as it's new) but I need someone to come and fit it and then work out how to get some new remotes for the motor.

CombeMarshal

2,030 posts

257 months

Saturday 18th March 2006
quotequote all
Do you know the make??

Any competent Electrician should be able to sort it out for you, Bit to far for me, and I'm carless at the moment!
Or maybe post some pics?

uuf361

Original Poster:

3,185 posts

253 months

Saturday 18th March 2006
quotequote all
Make seems to say BFI - it's not the motor that's the problem, it's more the garage door (which I don't want to particularly replace).......I need someone who knows about this stuff to come and advise if this bespoke arm I have to make it go up/down will do the job, if they can fit it, how much and can they then get some new remotes.

Tried pics but all a bit too dark (even with the lights on!) in the garage.

I've got a quote for a whole new roller door electrified thing, but that was £1,150 which is a tad on the expensive side.......

CombeMarshal

2,030 posts

257 months

Saturday 18th March 2006
quotequote all
Is this the type of thing you got?

uuf361

Original Poster:

3,185 posts

253 months

Saturday 18th March 2006
quotequote all
Yep, excatly like that but not attached to the door for some reason and have arm thingy to attach to door and runner to help it work.....but at that stage the last guy lost interest.......

CombeMarshal

2,030 posts

257 months

Saturday 18th March 2006
quotequote all
It could be that it is not man enough?

Try here for the remotes, www.garage-door-remotes.co.uk/bft.htm
If thats the type they are a piece of cake to programme, just open the unit, look for the dip switches and make the ones in the new remote match up with them.

I'm not 100% sure, but you may be able to put stronger srpings in.

CombeMarshal

2,030 posts

257 months

Saturday 18th March 2006
quotequote all
Sounds like he's done all the hard work, Could be that you just need a handy man for a few hours, May be worth getting a few more garage down companies round to look at it, and then slip them a few quid to sort it!

Just to clear things up, Have you paid the other chap anything yet?

>> Edited by CombeMarshal on Saturday 18th March 12:23

uuf361

Original Poster:

3,185 posts

253 months

Saturday 18th March 2006
quotequote all
Looking at the picture that one has runners which go up into the roof which seems right. The problem with my door is that they run up the wall and stop and don't go back along the roof, hence the motor can only pull so far up before it seems pohysically impossible for it to pull it up when it needs/wants to pull it back.....

Will try for the remotes.......

trevorw

2,875 posts

313 months

Saturday 18th March 2006
quotequote all
Never used these guys but are only up the A22 in Whyteleaf
, might be worh a try even for some advice?

www.wessexgaragedoors.co.uk/wessex/about_wessex.html

uuf361

Original Poster:

3,185 posts

253 months

Saturday 18th March 2006
quotequote all
Haven't paid the other guy anything yet but have written the nice letter after 6+ months without contact. Shall write another, sent recorded delivery, along the lines of 'if stuff not collected within 2 weeks shall assume not wanted and free to do with it what I want, and give me my keys back!'

trevorw

2,875 posts

313 months

Saturday 18th March 2006
quotequote all
Or here have a place in Crawley!

www.garagedoor.co.uk/repairs.htm