How fast could a 125 train accelerate?
Discussion
I was standing on the platform in Reading last night watching a 125 type train pulling out of the station with a load of carriages behind it. It got me pondering about it's power…
I understand that they're diesel/electric (correct me if I'm wrong) with the diesel powering a generator which in turn powers the electric motors. This would, I assume, give a couple of advantages, the flat torque curve of an electric motor and no need to lug around a very weighty gearbox (not to mention making a gearbox that would handle the power and gear shifts)
I often think how impressive they are giving you a noticeable shove when pulling out of the station fully loaded with carriages, passengers and luggage. Now, they have to move away fairly slowly for the most part as to not upset passengers/knock things over/spill drinks. So, unencumbered, the engine unit alone, how fast could it get to sixty if the hammer was dropped?
I'm primarily interested in the separate engine cars like the 125 from my train set in years gone by, not the more modern engine-in-each-carriage type.
I understand that they're diesel/electric (correct me if I'm wrong) with the diesel powering a generator which in turn powers the electric motors. This would, I assume, give a couple of advantages, the flat torque curve of an electric motor and no need to lug around a very weighty gearbox (not to mention making a gearbox that would handle the power and gear shifts)
I often think how impressive they are giving you a noticeable shove when pulling out of the station fully loaded with carriages, passengers and luggage. Now, they have to move away fairly slowly for the most part as to not upset passengers/knock things over/spill drinks. So, unencumbered, the engine unit alone, how fast could it get to sixty if the hammer was dropped?
I'm primarily interested in the separate engine cars like the 125 from my train set in years gone by, not the more modern engine-in-each-carriage type.
I'm sure they do go over 70 now - it would be difficult for them to manage Coventry to Euston in under an hour otherwise, particularly since that includes stops at Milton Keynes and Watford, and the final slow bit into Euston.
Even my local commuter train into Birmingham gets up to nearly 100mph between Coventry and Birmingham International, GPS measured.
Even my local commuter train into Birmingham gets up to nearly 100mph between Coventry and Birmingham International, GPS measured.
absolutely said:
Duke Thrust said:
matchmaker said:
0-100 mph 195 seconds, another 3-4 minutes to get up to 130 mph
Is that with our without load?esselte said:
xiphias said:
2250hp, 70t according to wiki. 32hp/ton is not so quick.
What's the torque though?Tractive effort Maximum: 17,980 lbf (80.0 kN)
Continuous: 10,340 lbf (46.0 kN
say take the Class 55 Deltic they replaced.
they had 2 engines developing 1650bhp with a max tractive effort of 50000lbf
absolutely said:
Duke Thrust said:
matchmaker said:
0-100 mph 195 seconds, another 3-4 minutes to get up to 130 mph
Is that with our without load?I had a cab ride in a 125 back in April. Indicated 120, GPS verified at 118.
There may be sections of track with speed restrictions, or there may be differential speed restrictions for different rollingstock (eg Pendolino / Voyager / 321), but it is not necessarily due to track not taking the load.
Gassing Station | The Pie & Piston Archive | Top of Page | What's New | My Stuff






