Radiator flushing v replacement.
Discussion
cobra kid said:
Two plumbers opinions..one stated it's best to replace radiators as the rotting process has started already. Other says it's not essential as flushing will give you years worth of usage.
Any thoughts? Cheers.
Need to put inhibitor in, that'll stop the rot. Could do with a flush though as well.Any thoughts? Cheers.
cobra kid said:
Two plumbers opinions..one stated it's best to replace radiators as the rotting process has started already. Other says it's not essential as flushing will give you years worth of usage.
Any thoughts? Cheers.
I'd guess the rot starts the day you put them in, unless new rads come with some sort of protective treatment on the inside? I was told that once all the oxygen has been used up in the water the ferrous oxide process comes to a halt. It is only when you keep adding more water that it continues.Any thoughts? Cheers.
fatboy b said:
cobra kid said:
Two plumbers opinions..one stated it's best to replace radiators as the rotting process has started already. Other says it's not essential as flushing will give you years worth of usage.
Any thoughts? Cheers.
Need to put inhibitor in, that'll stop the rot. Could do with a flush though as well.Any thoughts? Cheers.
fatboy b said:
cobra kid said:
Two plumbers opinions..one stated it's best to replace radiators as the rotting process has started already. Other says it's not essential as flushing will give you years worth of usage.
Any thoughts? Cheers.
Need to put inhibitor in, that'll stop the rot. Could do with a flush though as well.Any thoughts? Cheers.
Sounds like the plumber who suggested replacing the rads was short of work and needed to make a bit of cash!
Oh I will share my little mistake with you. I had a pump which was 'chugging' plumbers words not mine. Every now and then, more now than then, it would go slow - you could hear the pump slow down. I had an 'expert' in
that told me that I had to have my system Powerflushed.. at a cost of about £800 I kid you not 
I visited my local boiler centre and asked for best advice. He told me to put in a cleaner, leave it for a week and then flush it out and refill it with inhibitor. The pump was very noisy at this point and I thought I would end up having to have a new one. Anyway, guess who forgot to take the cleaner out of the system... for 3 months
I flsuhed it out and it came out brown to start with and then to my suprise it was clear very soon after. I rang the boiler clinic, he said I was lucky I had not damaged the seals of the pump or the boiler, so I had service done on the boiler and all was well.
Total cost for the flush stuff was about £28.
Powerflush would have been £800 - go figure!
The stuff was made by Furnox and called Heavy Duty Restorer and it does exactly what it says on the tin (bottle)
that told me that I had to have my system Powerflushed.. at a cost of about £800 I kid you not 
I visited my local boiler centre and asked for best advice. He told me to put in a cleaner, leave it for a week and then flush it out and refill it with inhibitor. The pump was very noisy at this point and I thought I would end up having to have a new one. Anyway, guess who forgot to take the cleaner out of the system... for 3 months
I flsuhed it out and it came out brown to start with and then to my suprise it was clear very soon after. I rang the boiler clinic, he said I was lucky I had not damaged the seals of the pump or the boiler, so I had service done on the boiler and all was well.Total cost for the flush stuff was about £28.
Powerflush would have been £800 - go figure!
The stuff was made by Furnox and called Heavy Duty Restorer and it does exactly what it says on the tin (bottle)

If you change the radiators you will still leave plenty of sludge in the system and may well get it on the carpets!!
Inhibitors are all very well, but as mentioned above 'free oxygen' is the killer. If the hydraulic pressures are OK the system will draw in no (or very, very little) fresh water and no rusting will occur. A very sludged system should be accurately diagnosed as to it's problems before throwing money at it. You need a decent heating engineer.
HTH
Inhibitors are all very well, but as mentioned above 'free oxygen' is the killer. If the hydraulic pressures are OK the system will draw in no (or very, very little) fresh water and no rusting will occur. A very sludged system should be accurately diagnosed as to it's problems before throwing money at it. You need a decent heating engineer.
HTH
SS HSV said:
I rang the boiler clinic, he said I was lucky I had not damaged the seals of the pump or the boiler, so I had service done on the boiler and all was well.
That's so unlikely. Even Fernox's Heavy Duty Restorer isn't that strong. I'd love to hear from anyone who has made a pump or boiler leak with proprietary cleaning chemicals.
Powerflushing is definately the only way you'll get a system clean and I'd put a magnetic collector on too.
Doing it yourself is fine and if you don't include your labour it's a cheap thing to do, but don't scrimp.
You should definately put in a decent cleaner and circulate it HOT for a period of weeks, then powerflush the primaries and each radiator seperately until completely clean. I've seen them run clean for 5 minutes then have a big slug come through.
But like I said, please find out WHY it's making sludge first......
SS HSV said:
Oh I will share my little mistake with you. I had a pump which was 'chugging' plumbers words not mine. Every now and then, more now than then, it would go slow - you could hear the pump slow down. I had an 'expert' in
that told me that I had to have my system Powerflushed.. at a cost of about £800 I kid you not 
I visited my local boiler centre and asked for best advice. He told me to put in a cleaner, leave it for a week and then flush it out and refill it with inhibitor. The pump was very noisy at this point and I thought I would end up having to have a new one. Anyway, guess who forgot to take the cleaner out of the system... for 3 months
I flsuhed it out and it came out brown to start with and then to my suprise it was clear very soon after. I rang the boiler clinic, he said I was lucky I had not damaged the seals of the pump or the boiler, so I had service done on the boiler and all was well.
Total cost for the flush stuff was about £28.
Powerflush would have been £800 - go figure!
The stuff was made by Furnox and called Heavy Duty Restorer and it does exactly what it says on the tin (bottle)
You are me!!!!!!
that told me that I had to have my system Powerflushed.. at a cost of about £800 I kid you not 
I visited my local boiler centre and asked for best advice. He told me to put in a cleaner, leave it for a week and then flush it out and refill it with inhibitor. The pump was very noisy at this point and I thought I would end up having to have a new one. Anyway, guess who forgot to take the cleaner out of the system... for 3 months
I flsuhed it out and it came out brown to start with and then to my suprise it was clear very soon after. I rang the boiler clinic, he said I was lucky I had not damaged the seals of the pump or the boiler, so I had service done on the boiler and all was well.Total cost for the flush stuff was about £28.
Powerflush would have been £800 - go figure!
The stuff was made by Furnox and called Heavy Duty Restorer and it does exactly what it says on the tin (bottle)


Scary, but Brit Gas told me the same thing, noisy pump, and they won't replace it as the system NEEDS an £800 power flush. You know the rest, except my Furnox restorer is still in there, a year later, and the noisy rattly pump is silent now.

10 Pence Short said:
To give you an idea, we're charging £400 and still making a very very healthy profit on power flushing. Somebody charging £800 is taking the preverbial.
Interesting.Most of the systems we have to powerflush require two blokes for 3/4 of a day plus chemicals to do effectively. Allowing for a consideration for the investment in the machine I can only deduce that your labour rates are FAR less than ours.....
Ferg said:
10 Pence Short said:
To give you an idea, we're charging £400 and still making a very very healthy profit on power flushing. Somebody charging £800 is taking the preverbial.
Interesting.Most of the systems we have to powerflush require two blokes for 3/4 of a day plus chemicals to do effectively. Allowing for a consideration for the investment in the machine I can only deduce that your labour rates are FAR less than ours.....
Gassing Station | The Pie & Piston Archive | Top of Page | What's New | My Stuff


