Any Construction Types About?
Discussion
Instead of having that block stuck next to the wall, for the reinforcing column thingy, build it in so it forms part of it.
I don't really see why you'd want to lay them all flat either, as it will make it extremely heavy and labour intensive. And use twice as many blocks.
Here's a piccie of the way I built columns into my garage. 4" blocks used normally, but two laid flat as the column. On the next row you have the block vertically, one to make the thickness up, at the back of the column, the one this side will be staggered so it is all locked together:

Here you can see how it goes up the wall, with the outside layer of blocks looking like conventional staggered block laying. Excuse the crappy mortar work as I planned to render it all so made no effort to do the job neatly.

ETA; and yes, take the advice from Onzlouk,pay the extra and get a pro brickie to build you a nice wall out of nice looking brick. I like my garage, but I'd never, ever, never, ever build another one this strenuous, back breaking, tedious, expensive, time consuming way.......
I don't really see why you'd want to lay them all flat either, as it will make it extremely heavy and labour intensive. And use twice as many blocks.
Here's a piccie of the way I built columns into my garage. 4" blocks used normally, but two laid flat as the column. On the next row you have the block vertically, one to make the thickness up, at the back of the column, the one this side will be staggered so it is all locked together:

Here you can see how it goes up the wall, with the outside layer of blocks looking like conventional staggered block laying. Excuse the crappy mortar work as I planned to render it all so made no effort to do the job neatly.


ETA; and yes, take the advice from Onzlouk,pay the extra and get a pro brickie to build you a nice wall out of nice looking brick. I like my garage, but I'd never, ever, never, ever build another one this strenuous, back breaking, tedious, expensive, time consuming way.......

Edited by King Herald on Saturday 26th July 22:23
280 blocks will do, with a pier at the far end, and pier at around 3m.
what size footing have you got in there?
you don't want to build off it then have the wall fail because of an inadicuate (sp) footing do you?
Also it will be a pice of piss to build just make sure you get both end vertical and pull a line through,
you will need to hire / buy a mixer and trestles and boards.
also hope you don't mind doing some hard graft, as thats what it will be.
You going to render it yourself?
what size footing have you got in there?
you don't want to build off it then have the wall fail because of an inadicuate (sp) footing do you?
Also it will be a pice of piss to build just make sure you get both end vertical and pull a line through,
you will need to hire / buy a mixer and trestles and boards.
also hope you don't mind doing some hard graft, as thats what it will be.
You going to render it yourself?
Edited by Autonotiv on Saturday 26th July 22:27
Cheers for the advice!
Yeah, I see what you mean with your garage.
The reason for laying them flat was just to make it a bit more stable. The wind absolutely batters the fence panels that are currently there, so I thought we'd be better of laying them flat, with a pillar or two to make it strong/stable enough.
I see a lot of concrete block extentions and garages that have been renedered, and they don't seem to suffer with the frost?
I was also thinkin of doing it with thermalites. Purely to lighten the load on the footings.
My dad's been nagging me for ages to build a wall there, but I've refused to do anything until he gets someone to check the footings. He won't listen though.
My mate who is a general builder was round a few weeks ago doing some plastering. He said what is down there should be adequate, but we're better of using fibotherm blocks? I've not really heard of them, I'm assuming they are like Thermalites?
All the tools and stuff I'll borrow from my mate. I could even get him to build it for me, but where is the fun in that
I may give the rendering a go myself..haha
Building it is the easy part, I'm not worried about that bit. Just wanna get the planning bit and setting out bit right.
Hard graft is fine. Compared to the 50kg slate slabs I was laying in my last job, I'm sure some 4" blocks won't be a problem
Yeah, I see what you mean with your garage.
The reason for laying them flat was just to make it a bit more stable. The wind absolutely batters the fence panels that are currently there, so I thought we'd be better of laying them flat, with a pillar or two to make it strong/stable enough.
I see a lot of concrete block extentions and garages that have been renedered, and they don't seem to suffer with the frost?
I was also thinkin of doing it with thermalites. Purely to lighten the load on the footings.
My dad's been nagging me for ages to build a wall there, but I've refused to do anything until he gets someone to check the footings. He won't listen though.
My mate who is a general builder was round a few weeks ago doing some plastering. He said what is down there should be adequate, but we're better of using fibotherm blocks? I've not really heard of them, I'm assuming they are like Thermalites?
All the tools and stuff I'll borrow from my mate. I could even get him to build it for me, but where is the fun in that

I may give the rendering a go myself..haha
Building it is the easy part, I'm not worried about that bit. Just wanna get the planning bit and setting out bit right.
Hard graft is fine. Compared to the 50kg slate slabs I was laying in my last job, I'm sure some 4" blocks won't be a problem

Two 100mm blocks laid side by side stretcher 10mm apart with the the 10mm filled and ties at 900mm centres every other course (staggered) and I doubt you will need any piers.
Don't bother with any sort of thermalite blocks, they wont be dense enough, and unless you re-inforce the render it will crack all day long due to expansion.
Don't bother with any sort of thermalite blocks, they wont be dense enough, and unless you re-inforce the render it will crack all day long due to expansion.
s
gathore said:
gathore said: Was just looking for some advice/guidance. I should know myself, having done a bit of bricklaying in college, but that was a while ago.
Basically, our fence panels keep blowing down, so the time has come for me to put my skills to use..haha
I have done some very technical drawings in MS Paint to help illustrate.
The wall is going to be built out of blocks, layed flat.
[URL=http://imageshack.us]
[/URL]
This is what I'm going for. Remove all of the fence posts and build a block work wall that will later be rendered. The neighbours currently have a hedge on their side of the garden (as seen in green in the picture), which they can either leave, or remove and have there side rendered.
[URL=http://imageshack.us]
[/URL]
The blockwork will go something like this:
[URL=http://imageshack.us]
[/URL]
The thicker lines show the first course, then the thin ones the second course. I think that's half bond? The lines up the wall are just an example of how high it will go. I know it will be more than 5 bricks in length, that sketch is just to show the bond.
I then attempted to work out the amount of blocks needed.
6m = 6000mm.
2m = 2000mm. Obviously.
So a block layed flat will be 440mm in length, so I divided 6000 by 440 = 13.6, so round it up to 14. So the wall will be 14 blocks long?
Then 100mm for the height of the block, so 20 courses high will give the desired 2m?
Though, that isn't taking in to consideration the size of joints, which I've only just thought about. hmmmmm.
So then that gives me 14x20 = 280. I'm not sure how that works with regards to the 2 piers? I'll probably add another 15 for wastage/damage.
I'm guessing at 6m it will need the 2 piers, though, I'm not 100% sure where to put them. Maybe something like this, every 5th block?
[URL=http://imageshack.us]
[/URL]
I know they don't look much like blocks, but that's just to give an example..haha
I know there's a few Quantity Surveyors and builders on here, hopefully some will be along soon to mock, and maybe even help
Edit - All of that and I forgot to ask the main question.
What sort of blocks should I use? I thought just regular 4" concretes would do the job?
I am a Chartered Civil Engineer... having studied your scheme..... my professional opinion is....Basically, our fence panels keep blowing down, so the time has come for me to put my skills to use..haha
I have done some very technical drawings in MS Paint to help illustrate.
The wall is going to be built out of blocks, layed flat.
[URL=http://imageshack.us]
[/URL]This is what I'm going for. Remove all of the fence posts and build a block work wall that will later be rendered. The neighbours currently have a hedge on their side of the garden (as seen in green in the picture), which they can either leave, or remove and have there side rendered.
[URL=http://imageshack.us]
[/URL]The blockwork will go something like this:
[URL=http://imageshack.us]
[/URL]The thicker lines show the first course, then the thin ones the second course. I think that's half bond? The lines up the wall are just an example of how high it will go. I know it will be more than 5 bricks in length, that sketch is just to show the bond.
I then attempted to work out the amount of blocks needed.
6m = 6000mm.
2m = 2000mm. Obviously.
So a block layed flat will be 440mm in length, so I divided 6000 by 440 = 13.6, so round it up to 14. So the wall will be 14 blocks long?
Then 100mm for the height of the block, so 20 courses high will give the desired 2m?
Though, that isn't taking in to consideration the size of joints, which I've only just thought about. hmmmmm.
So then that gives me 14x20 = 280. I'm not sure how that works with regards to the 2 piers? I'll probably add another 15 for wastage/damage.
I'm guessing at 6m it will need the 2 piers, though, I'm not 100% sure where to put them. Maybe something like this, every 5th block?
[URL=http://imageshack.us]
[/URL]I know they don't look much like blocks, but that's just to give an example..haha
I know there's a few Quantity Surveyors and builders on here, hopefully some will be along soon to mock, and maybe even help

Edit - All of that and I forgot to ask the main question.
What sort of blocks should I use? I thought just regular 4" concretes would do the job?
Edited by s
gathore on Saturday 26th July 21:54
gathore on Saturday 26th July 21:54... you are a plank !!

I thank youse !!
Advice?
Build the thing how you want to.
I've put up shelves -off which speakers have then rolled.
If you ask 'experts' for advice, how are you going to learn from your mistakes? Part of the triumph of putting something up yourself is remembering the bad times, like when you realised it was going horribly wrong and smashed down the previous 2 days work in a massive huff.
'Real men' solidly f
k things up especially during tasks within which 'real men' are expected to excel.
Build the thing how you want to.
I've put up shelves -off which speakers have then rolled.
If you ask 'experts' for advice, how are you going to learn from your mistakes? Part of the triumph of putting something up yourself is remembering the bad times, like when you realised it was going horribly wrong and smashed down the previous 2 days work in a massive huff.
'Real men' solidly f
k things up especially during tasks within which 'real men' are expected to excel. captainzep said:
Advice?
Build the thing how you want to.
I've put up shelves -off which speakers have then rolled.
If you ask 'experts' for advice, how are you going to learn from your mistakes? Part of the triumph of putting something up yourself is remembering the bad times, like when you realised it was going horribly wrong and smashed down the previous 2 days work in a massive huff.
'Real men' solidly f
k things up especially during tasks within which 'real men' are expected to excel.
That's certainly an interesting theory you have there.Build the thing how you want to.
I've put up shelves -off which speakers have then rolled.
If you ask 'experts' for advice, how are you going to learn from your mistakes? Part of the triumph of putting something up yourself is remembering the bad times, like when you realised it was going horribly wrong and smashed down the previous 2 days work in a massive huff.
'Real men' solidly f
k things up especially during tasks within which 'real men' are expected to excel. I think my neighbours might have a slightly different view on that, particularly if the wall was to fall down and kill one of them

I'm a bricklayer by trade, although I'm out of the trade now. Another vote for you to pay professionals to do the job, a) for aesthetic reasons, walls are long term reminders of a job done right or a job done wrong. b) a builder should know how to go about building a high wall with safety and proper building guidelines such as 'footings' to take the weight. For example a good concrete footing laid on chalk will take the weight. A good concrete footing laid on clay or other changeable subsoils at the wrong depth will cause the footing to crack or move which in turn will crack the wall. You will also need an expansion joint where the wall joins the house.
ZR1cliff said:
I'm a bricklayer by trade, although I'm out of the trade now. Another vote for you to pay professionals to do the job, a) for aesthetic reasons, walls are long term reminders of a job done right or a job done wrong. b) a builder should know how to go about building a high wall with safety and proper building guidelines such as 'footings' to take the weight. For example a good concrete footing laid on chalk will take the weight. A good concrete footing laid on clay or other changeable subsoils at the wrong depth will cause the footing to crack or move which in turn will crack the wall. You will also need an expansion joint where the wall joins the house.
There will be a gap from the house to the wall. The patio goes off on an angle.I know what you're all saying about getting professionals in to do it, but that takes the fun out of it. I don't wanna be standing around watching them do it when I can do it myself.
I know how to lay bricks/blocks, I was just starting this thread to see if anyone knew about the piers and what sort of blocks I should use.
Not taking anything away from bricklayers, but simple garden walls like this aren't that hard to do. And with it being rendered, it doesn't have to be to the highest standard, just structurally sound. Which it will be if I get the piers in the right places and use the right block.
s
gathore said:
gathore said:ZR1cliff said:
I'm a bricklayer by trade, although I'm out of the trade now. Another vote for you to pay professionals to do the job, a) for aesthetic reasons, walls are long term reminders of a job done right or a job done wrong. b) a builder should know how to go about building a high wall with safety and proper building guidelines such as 'footings' to take the weight. For example a good concrete footing laid on chalk will take the weight. A good concrete footing laid on clay or other changeable subsoils at the wrong depth will cause the footing to crack or move which in turn will crack the wall. You will also need an expansion joint where the wall joins the house.
There will be a gap from the house to the wall. The patio goes off on an angle.I know what you're all saying about getting professionals in to do it, but that takes the fun out of it. I don't wanna be standing around watching them do it when I can do it myself.
I know how to lay bricks/blocks, I was just starting this thread to see if anyone knew about the piers and what sort of blocks I should use.
Not taking anything away from bricklayers, but simple garden walls like this aren't that hard to do. And with it being rendered, it doesn't have to be to the highest standard, just structurally sound. Which it will be if I get the piers in the right places and use the right block.
s
gathore said:
gathore said: stuff
A man after my own heart, fair play go for it if you feel like you can do a presentable job. Be sure about the footings, obviously a high 9" wall will be very heavy so make sure the footings are adequate. What's your subsoil ? If it's clay i've known the odd unusually dry weather dry clay out to a depth thats affected footings and caused cracks. Check out all types of blocks on offer, you might find a decent face block you can use to keep costs down.Edited by ZR1cliff on Sunday 27th July 14:25
Gassing Station | The Pie & Piston Archive | Top of Page | What's New | My Stuff



