Oiling worktops - linseed or danish?
Discussion
Chaps,
One for the kitchen fitters amongst us, or those who are more au fait with woodwork than I am ...
I recently fitted a new kitchen in zcacogp-Towers, and mightily pleased with it I am. It has solid oak worktops, which look the business.
These oak worktops need to be treated with linseed oil, as per the instructions. Supposedly once a month for the first 12 months, then once every 2 months.
Treating them isn't a problem. The oil is. It takes a VERY long time to dry. The instructions are to apply it with a brush or rag, thinly, and then polish off the excess 20 minutes later. It is meant to be usable withing an hour, but in practice it stays sticky for a good 48 hours or more, which means we can't use them as we'd like to. I have tried diluting the linseed oil 50:50 with white spirit, which makes it dry fractionally quicker but only fractionally. (We were away for the weekend a couple of weeks ago, so treated it on Friday evening before we left and it was still perceptibly sticky to the touch when we got back on Sunday afternoon.)
One suggestion has been to use danish oil instead of linseed oil. Would this work? Would this dry any quicker? Would this protect the surfaces sufficiently? Would I have to remove all the linseed oil from previous applications before applying danish oil?
Alternatively, does anyone have any suggestions as to what I am doing wrong, and why it is taking so damned long to dry?
Should anyone be interested, here is a piccie of some of the worktop soon after installation:

Oli.
One for the kitchen fitters amongst us, or those who are more au fait with woodwork than I am ...
I recently fitted a new kitchen in zcacogp-Towers, and mightily pleased with it I am. It has solid oak worktops, which look the business.
These oak worktops need to be treated with linseed oil, as per the instructions. Supposedly once a month for the first 12 months, then once every 2 months.
Treating them isn't a problem. The oil is. It takes a VERY long time to dry. The instructions are to apply it with a brush or rag, thinly, and then polish off the excess 20 minutes later. It is meant to be usable withing an hour, but in practice it stays sticky for a good 48 hours or more, which means we can't use them as we'd like to. I have tried diluting the linseed oil 50:50 with white spirit, which makes it dry fractionally quicker but only fractionally. (We were away for the weekend a couple of weeks ago, so treated it on Friday evening before we left and it was still perceptibly sticky to the touch when we got back on Sunday afternoon.)
One suggestion has been to use danish oil instead of linseed oil. Would this work? Would this dry any quicker? Would this protect the surfaces sufficiently? Would I have to remove all the linseed oil from previous applications before applying danish oil?
Alternatively, does anyone have any suggestions as to what I am doing wrong, and why it is taking so damned long to dry?
Should anyone be interested, here is a piccie of some of the worktop soon after installation:

Oli.
danish oil is the way to go it dries alot quicker but will leave a glossy/satin finish which will get glossier with each application.
also sounds to me you are oiling it too often. if you are not careful it will end up sticky and never dry, especialy with linseed oil.once every other month, and just a light wipe is more than enough. has the underneath been oiled at all? it can easily bow and leave a raised hump as the bottom will dry out faster than the top. ultimately though it all depends on the quality of top as to how stable it is. ps be very diligent about water spills around the sink as the wood will end up black and knackered
also sounds to me you are oiling it too often. if you are not careful it will end up sticky and never dry, especialy with linseed oil.once every other month, and just a light wipe is more than enough. has the underneath been oiled at all? it can easily bow and leave a raised hump as the bottom will dry out faster than the top. ultimately though it all depends on the quality of top as to how stable it is. ps be very diligent about water spills around the sink as the wood will end up black and knackered
Chaps,
Thanks for your comments. Looks like danish may be the way to go.
Can I apply it over the top of the existing finish (achieved with 5 or so layers of linseed), or will I need to sand off all the linseed-finish? (If I do have to sand it, it will be a big job and I may end up just sticking with linseed.)
Allegro - you sound like you know a fair bit about this. The bottoms of the worktops were treated with linseed (generously, unlike the tops) before fitting them, and we put some waterproof varnish on the underneath where the worktop goes over the washing machine and dishwasher. And around the sink cut-out too.
Interesting that you think we could be over-oiling them. We are following the instructions (honest, guv'!) Maybe they encourage over-oiling?
Oli.
Thanks for your comments. Looks like danish may be the way to go.
Can I apply it over the top of the existing finish (achieved with 5 or so layers of linseed), or will I need to sand off all the linseed-finish? (If I do have to sand it, it will be a big job and I may end up just sticking with linseed.)
Allegro - you sound like you know a fair bit about this. The bottoms of the worktops were treated with linseed (generously, unlike the tops) before fitting them, and we put some waterproof varnish on the underneath where the worktop goes over the washing machine and dishwasher. And around the sink cut-out too.
Interesting that you think we could be over-oiling them. We are following the instructions (honest, guv'!) Maybe they encourage over-oiling?
Oli.
Gassing Station | The Pie & Piston Archive | Top of Page | What's New | My Stuff



