Digital Passport Photo
Discussion
I need to get a digital passport photo for a TFL photocard.
The requirement is that the photo must be atleast 300dpi in resolution. I thought this was only to do with printing?
In any case, I have a bmp file which is 470kb and around 400pixels by 300 pixels. It was taken on a Sony digital cam at 3mp setting. The file properties say the depth is 24 bits.
Basically will this satisfy the 300dpi requirement? If not, what can I do to remedy this, bearing in mind the file cannot be larger then 1mb.
Thanks in advance.
The requirement is that the photo must be atleast 300dpi in resolution. I thought this was only to do with printing?
In any case, I have a bmp file which is 470kb and around 400pixels by 300 pixels. It was taken on a Sony digital cam at 3mp setting. The file properties say the depth is 24 bits.
Basically will this satisfy the 300dpi requirement? If not, what can I do to remedy this, bearing in mind the file cannot be larger then 1mb.
Thanks in advance.
Thanks for your help.
I doubt it'll be printed on the card at any bigger then passport size, so 1.4"x1.8".
So am I right in saying that to achieve 300dpi, it needs to be 420 pixels by 540 pixels approx. or bigger to satisfy the requirments.
Picture quality has deteriorated by sizing up to this size, but I guess given the size of the printout this shouldn't matter.
I doubt it'll be printed on the card at any bigger then passport size, so 1.4"x1.8".
So am I right in saying that to achieve 300dpi, it needs to be 420 pixels by 540 pixels approx. or bigger to satisfy the requirments.
Picture quality has deteriorated by sizing up to this size, but I guess given the size of the printout this shouldn't matter.
Edited by H_Kan on Friday 12th September 01:17
H_Kan said:
I need to get a digital passport photo for a TFL photocard.
The requirement is that the photo must be atleast 300dpi in resolution. I thought this was only to do with printing?
In any case, I have a bmp file which is 470kb and around 400pixels by 300 pixels. It was taken on a Sony digital cam at 3mp setting. The file properties say the depth is 24 bits.
Basically will this satisfy the 300dpi requirement? If not, what can I do to remedy this, bearing in mind the file cannot be larger then 1mb.
Thanks in advance.
Save in any format but bmp for a start as they are much larger then the equivalent image in .jpeg, .png etc. The requirement is that the photo must be atleast 300dpi in resolution. I thought this was only to do with printing?
In any case, I have a bmp file which is 470kb and around 400pixels by 300 pixels. It was taken on a Sony digital cam at 3mp setting. The file properties say the depth is 24 bits.
Basically will this satisfy the 300dpi requirement? If not, what can I do to remedy this, bearing in mind the file cannot be larger then 1mb.
Thanks in advance.
Gassing Station | The Pie & Piston Archive | Top of Page | What's New | My Stuff


