First tool kit for my little brother
First tool kit for my little brother
Author
Discussion

cat@10

Original Poster:

141 posts

237 months

Wednesday 3rd December 2008
quotequote all
I want to get my little brother (13) his first tool kit for Christmas. I'm looking for something with a few sockets and a ratchet, spanners and screwdrivers. Halfords seem a bit expensive for what you get. Any ideas where I could get a simple set?

littlegreenfairy

10,134 posts

250 months

Wednesday 3rd December 2008
quotequote all
Poundland.

And yes I do mean it.

I've had screwdrivers and bits from there and whilst they aren't the greatest, for little stuff they are fine.

Ebo100

506 posts

233 months

Wednesday 3rd December 2008
quotequote all
My son has just got his first motorbike so I bought him some spanners and sockets from Boyes and Wilkinsons. Don't think I spent much more than a tenner.

Adrian W

15,513 posts

257 months

Wednesday 3rd December 2008
quotequote all
cat@10 said:
I want to get my little brother (13) his first tool kit for Christmas. I'm looking for something with a few sockets and a ratchet, spanners and screwdrivers. Halfords seem a bit expensive for what you get. Any ideas where I could get a simple set?
Go for Halfords Professional, start off the right way with good tools.

elster

17,517 posts

239 months

Wednesday 3rd December 2008
quotequote all
cat@10 said:
I want to get my little brother (13) his first tool kit for Christmas. I'm looking for something with a
few sockets and a ratchet, spanners and screwdrivers. Halfords seem a bit expensive for what you get. Any ideas where I could get a simple set?
Screwfix had a cracking deal on the other day.

It was something daft like £13 for a full toolbox.

http://www.screwfix.com/prods/85147/Hand-Tools/Too... there ya go.

or tool chest here

http://www.screwfix.com/prods/66008/Automotive/Soc...



Edited by elster on Wednesday 3rd December 12:37

Malh001

1,751 posts

257 months

Wednesday 3rd December 2008
quotequote all
Adrian W said:
cat@10 said:
I want to get my little brother (13) his first tool kit for Christmas. I'm looking for something with a few sockets and a ratchet, spanners and screwdrivers. Halfords seem a bit expensive for what you get. Any ideas where I could get a simple set?
Go for Halfords Professional, start off the right way with good tools.
I agree.

My grandad always said "never buy cheap tools" I did once and an hour later of bent allen keys, snapped socket drives and skinned knuckles, i went and got some decent kit.

M005

210 posts

254 months

Wednesday 3rd December 2008
quotequote all
Argos? I got a spanner roll from there when I was a student and it's still OK 14yrs later after some heavy use. OK I'll admit the 10mm one has been replaced after it lost a meeting of minds with the persuader (lump hammer smile )

On a lighter note we have got my two year old this for Christmas xmas


Fairly well equipped for a 2yr old, didn't have things like that in my day thumbup

Ganglandboss

8,547 posts

232 months

Wednesday 3rd December 2008
quotequote all
Adrian W said:
cat@10 said:
I want to get my little brother (13) his first tool kit for Christmas. I'm looking for something with a few sockets and a ratchet, spanners and screwdrivers. Halfords seem a bit expensive for what you get. Any ideas where I could get a simple set?
Go for Halfords Professional, start off the right way with good tools.
Yep!

I paid about £80 for a decent socket set with metric and imperial sockets, rat-sts, and a few spanners.

£80 for something with a lifetime guarentee is a feckin' bargain!


Incorrigible

13,668 posts

290 months

Wednesday 3rd December 2008
quotequote all
Don't forget to get something to take apart as well

For instance A friend of mine got a non working mini moto on freecycle...

Pasco

6,652 posts

257 months

Wednesday 3rd December 2008
quotequote all
littlegreenfairy said:
Poundland.

And yes I do mean it.

I've had screwdrivers and bits from there and whilst they aren't the greatest, for little stuff they are fine.
Are the tools cheep in poundland then ?

snotrag

15,634 posts

240 months

Wednesday 3rd December 2008
quotequote all
Screw fix or Machine Mart.

Not Pound land. Really.

mel

10,168 posts

304 months

Wednesday 3rd December 2008
quotequote all
Buy cheap, buy twice.

Another vote from me for getting reasonable quality, I'm not saying he needs Snap On but cheap tools are always a false economy and can be dangerous when they break at the least expected times, particulary sockets.

Stu247

815 posts

275 months

Wednesday 3rd December 2008
quotequote all
I got a Teng Tools socket set for xmas about 20 years ago.....great quality kit for the price and yes it's still going strong.

crofty1984

17,064 posts

233 months

Wednesday 3rd December 2008
quotequote all
M005 said:
Argos? I got a spanner roll from there when I was a student and it's still OK 14yrs later after some heavy use. OK I'll admit the 10mm one has been replaced after it lost a meeting of minds with the persuader (lump hammer smile )

On a lighter note we have got my two year old this for Christmas xmas


Fairly well equipped for a 2yr old, didn't have things like that in my day thumbup
My bro got a tool chest from argos for about 40 Quid. Not as bad as you think.

I agree that st tools are just plain old st tools. But a lot of us don't use them enough to really get value for money between good tools and excellent ones.
I've got a tool case from halfords (not sure if it's the proffesional range) and it's great (Though that was £100 down from £150)

elster

17,517 posts

239 months

Wednesday 3rd December 2008
quotequote all
mel said:
Buy cheap, buy twice.

Another vote from me for getting reasonable quality, I'm not saying he needs Snap On but cheap tools are always a false economy and can be dangerous when they break at the least expected times, particulary sockets.
You need some King Dick tools then for a 13 year old if you are wanting good tools.

Cracking name too. biggrin

mel

10,168 posts

304 months

Wednesday 3rd December 2008
quotequote all
crofty1984 said:
I agree that st tools are just plain old st tools. But a lot of us don't use them enough to really get value for money between good tools and excellent ones.
I've got a tool case from halfords (not sure if it's the proffesional range) and it's great (Though that was £100 down from £150)
You only need to use & hurt yourself once with shit to realise that they just aren't worth it. The realisation dawned on me when a Kamasas or some such tat 13mm 1/2" socket exploded while I was hanging off it trying to undo something, when a socket shatters your hands gets fired into whatever is next in line, in my case that resulted in a few stiches and probably a broken finger (I never got it x rayed and just strapped it up for a few weeks) but had it resulted in me putting my hand into something running the result is obvious.

HRG

72,863 posts

268 months

Wednesday 3rd December 2008
quotequote all
mel said:
crofty1984 said:
I agree that st tools are just plain old st tools. But a lot of us don't use them enough to really get value for money between good tools and excellent ones.
I've got a tool case from halfords (not sure if it's the proffesional range) and it's great (Though that was £100 down from £150)
You only need to use & hurt yourself once with shit to realise that they just aren't worth it. The realisation dawned on me when a Kamasas or some such tat 13mm 1/2" socket exploded while I was hanging off it trying to undo something, when a socket shatters your hands gets fired into whatever is next in line, in my case that resulted in a few stiches and probably a broken finger (I never got it x rayed and just strapped it up for a few weeks) but had it resulted in me putting my hand into something running the result is obvious.
Ahem, my Kamasa set is thirty years old and nothing has broken as yet!

Racylady

931 posts

262 months

Wednesday 3rd December 2008
quotequote all
elster said:
mel said:
Buy cheap, buy twice.

Another vote from me for getting reasonable quality, I'm not saying he needs Snap On but cheap tools are always a false economy and can be dangerous when they break at the least expected times, particulary sockets.
You need some King Dick tools then for a 13 year old if you are wanting good tools.

Cracking name too. biggrin
... or Facom (also a good name) ! smile

eliot

11,995 posts

283 months

Wednesday 3rd December 2008
quotequote all
HRG said:
mel said:
crofty1984 said:
I agree that st tools are just plain old st tools. But a lot of us don't use them enough to really get value for money between good tools and excellent ones.
I've got a tool case from halfords (not sure if it's the proffesional range) and it's great (Though that was £100 down from £150)
You only need to use & hurt yourself once with shit to realise that they just aren't worth it. The realisation dawned on me when a Kamasas or some such tat 13mm 1/2" socket exploded while I was hanging off it trying to undo something, when a socket shatters your hands gets fired into whatever is next in line, in my case that resulted in a few stiches and probably a broken finger (I never got it x rayed and just strapped it up for a few weeks) but had it resulted in me putting my hand into something running the result is obvious.
Ahem, my Kamasa set is thirty years old and nothing has broken as yet!
And mine - aka "Old Kamasa"

andy-xr

13,204 posts

233 months

Wednesday 3rd December 2008
quotequote all
HRG said:
Ahem, my Kamasa set is thirty years old and nothing has broken as yet!
Aye, you need to dig it out of the cellar and use it though biggrin