Humax turns on over night?
Humax turns on over night?
Author
Discussion

dan1981

18,097 posts

228 months

Tuesday 9th December 2008
quotequote all
I bought my parents a Humax for my dads birthday not long ago - and they have been using it on and off and getting used to it.

However i get here today and am told that its broken and needs mending????

Turns out that it keeps turning itself on over night?

I can't see anythign that has been scheduled to be recorded so I don't think its for that....

Any ideas? It keeps coming from the red light to thegreen light - if that makes any sense?

Cheers

Dan

mechsympathy

58,641 posts

284 months

Tuesday 9th December 2008
quotequote all
Does it switch itself on to update the programme schedule?

dan1981

18,097 posts

228 months

Tuesday 9th December 2008
quotequote all
anonymous said:
[redacted]
Sorry i didn't make it clear.... It turns on and then stays on. Doesn't turn back off.

Possibly i guess to update the scheduler? does it do this every night or just once a week? And should it turn back off again afterwords?

cronk-flakes

3,480 posts

282 months

Tuesday 9th December 2008
quotequote all
Firmware updates?

mechsympathy

58,641 posts

284 months

Tuesday 9th December 2008
quotequote all
dan1981 said:
Possibly i guess to update the scheduler? does it do this every night or just once a week? And should it turn back off again afterwords?
My Pioneer PVR does it (don't know how frequently though), but it does switch itself off again afterwards.

tank slapper

7,949 posts

312 months

Tuesday 9th December 2008
quotequote all
There is a setting for it to turn on and check for firmware updates overnight, but it should turn off again afterwards.

There is also a menu option that lets you set it to come on or go off at a certain time, so it might be worth checking to see if those are set.

It doesn't turn itself on to check the schedule, except when it is set for a recording when it turns of 15 minutes early to wait for the start signal if you have accurate recording enabled.

Edited by tank slapper on Tuesday 9th December 15:00

claypigeon60

840 posts

247 months

Tuesday 9th December 2008
quotequote all
cronk-flakes said:
Firmware updates?
Yes .. they turn on briefly overnight to check for Over The Air updates. Normally 4am, I think. But then should turn off again ...

GreenDog

2,261 posts

221 months

Tuesday 9th December 2008
quotequote all
There's a website which gives a timetable of when each brand of PVR will receive it's updates - can't for the life of me remember the name though

dan1981

18,097 posts

228 months

Tuesday 9th December 2008
quotequote all
Further investigation reveals - it does this every night. not just once a week.

So sometime ebtween about midnight and 6/7 am its turnign itself on, from standby, the fan kicking in etc etc and then not turning off.....

indi pearl

319 posts

226 months

Tuesday 9th December 2008
quotequote all
My sat receiver (not Humax) has a timer setting in the menu with both an "on" and seperate "off" time bar. Once you have set the "on" time this will repeat every 24 hours, switching the unit on. Equally you then set an "off" time and again this will repeat every 24 hours untill cancelled in the menu. I have on occasion forgoten to cancel the timer after recording and only realised when the machine has turned on again the following night.Could your Fathers' machine be doing the same?

cs02rm0

13,864 posts

220 months

Tuesday 9th December 2008
quotequote all
My Humax (9200 something? DVB anyway) may well turn itself on at night, it's set to auto update firmware but seems pretty slow to update the EPG. It's always off in the morning though (just displays the clock).

miniman

30,040 posts

291 months

Tuesday 9th December 2008
quotequote all
Why do they care if it is on? My Sky box is only off when it has crashed!