Shower question
Author
Discussion

nownek

Original Poster:

408 posts

241 months

Sunday 14th December 2008
quotequote all
Evening all.

A question for the plumbers.

My (Triton) electric shower developed a fault yesterday whereby turning it off (both on the unit and at the pull cord switch) no longer stops the water flowing through it. Thw switch still "feels" like it's working.

This now means that if I have a shower I have to first climb into the loft, release the inline valve, climb back down and then turn it on to get the water to heat up. Less than ideal...

Does this mean I'm in for a new shower or is this a common fault that can be repaired??

Thanks

R5GTTGaz

7,897 posts

249 months

Sunday 14th December 2008
quotequote all
Water solenoid failure.

Google for triton spare parts. Easy fix.

mik.ross

254 posts

224 months

Sunday 14th December 2008
quotequote all
does the switch have a Red Neon light within it? If it does and it goes on & off when the switch is switched then it can only be your solenoid.

HTH

edited for piss poor spelling.

Edited by mik.ross on Sunday 14th December 18:50

R5GTTGaz

7,897 posts

249 months

nownek

Original Poster:

408 posts

241 months

Sunday 14th December 2008
quotequote all
R5GTTGaz said:
Thank you very much- that is exactly the site I'd got to following your first post- it's the Triton Alicante so that'll be part 6 on the diagram (?) £27.

Cheers

nownek

Original Poster:

408 posts

241 months

Sunday 14th December 2008
quotequote all
mik.ross said:
does the switch have a Red Neon light within it? If it does and it goes on & off when the switch is switched then it can only be your solenoid.

HTH

edited for piss poor spelling.

Edited by mik.ross on Sunday 14th December 18:50
Yes light does go on and off. Thanks

R5GTTGaz

7,897 posts

249 months

Sunday 14th December 2008
quotequote all
Yeah, you will see the solenoid when you take the cover off, the water pipe will call in there first, when you energise it by turning the shower on it will open and allow the water to flow to the flow valve and boiler unit.

DO NOT go poking around if you don't know what you are doing.

mik.ross

254 posts

224 months

Sunday 14th December 2008
quotequote all
R5GTTGaz said:
DO NOT go poking around if you don't know what you are doing.
Do Not go poking about without the Electricity & Water switched Off.

R5GTTGaz

7,897 posts

249 months

Sunday 14th December 2008
quotequote all
mik.ross said:
R5GTTGaz said:
DO NOT go poking around if you don't know what you are doing.
Do Not go poking about without the Electricity & Water switched Off.
And if you don't know what you are doing.

mik.ross

254 posts

224 months

Sunday 14th December 2008
quotequote all
R5GTTGaz said:
mik.ross said:
R5GTTGaz said:
DO NOT go poking around if you don't know what you are doing.
Do Not go poking about without the Electricity & Water switched Off.
And if you don't know what you are doing.
Poking about is just about OK, just don't take anything apart.....you may well be left with some "bits" when it goes back together.

nownek

Original Poster:

408 posts

241 months

Sunday 14th December 2008
quotequote all
Fair points- I had the shower installed by a professional and I'll have it repaired by a professional. Whilst I'm hapy to attempt most things, water and electricity do not mix and I'd prefer to keep it that way.

It's just good to be informed before I make the call.

Swoxy

2,842 posts

239 months

Sunday 14th December 2008
quotequote all
Don't get a new part for £27.
Get a new Triton from Screwfix for £50.

Edited by Swoxy on Sunday 14th December 22:35