plumbers: extending a soil pipe for a toilet pan
Discussion
need help guys. ive raised my bathroom floor by around 20" higher.
the existing soil is a slow 90 deg bend with a rubber seal, flush with the old floor.
what do i use to extend up through the new floor? just some soil pipe? i have to fit a boss into the extension for the sink and bath waste.
finally, where the 4" soil pipe will rise through the new floor, what fitting do i put on the end of it? a picture would help
mark
the existing soil is a slow 90 deg bend with a rubber seal, flush with the old floor.
what do i use to extend up through the new floor? just some soil pipe? i have to fit a boss into the extension for the sink and bath waste.
finally, where the 4" soil pipe will rise through the new floor, what fitting do i put on the end of it? a picture would help

mark

http://www.mcalpineplumbing.com/productlist.asp
Is that what you're after?
Ok the link doesn't seem to work, but go on McAlpine's website and click through Product Catalogue onto WC connectors.
Is that what you're after?
Ok the link doesn't seem to work, but go on McAlpine's website and click through Product Catalogue onto WC connectors.
Edited by Mafioso on Thursday 5th February 18:41
Mafioso said:
that links not working mafioso 
unclemark123 said:
Mafioso said:
that links not working mafioso 
http://www.toolstation.com/shop/Plumbing/Pan+Conne...
speedychrissie said:
unclemark123 said:
ive raised my bathroom floor by around 20"
what?maybe I am just being dappy today, but I cant think of one logical reason to do that. is there one?

What is coming out of the floor?
If it is 4 inch soil pipe, you may need expose enough of the pipe so you can get a straight connector on to it. The extend using 4 inch pipe. To connect to the toilet, use a bent pan connector with an 1 1/2 connector on the top.

Just noticed you need to connect a bath waste to it, chuck on of these onto the 4" pipe. Strap on Boss

If it is 4 inch soil pipe, you may need expose enough of the pipe so you can get a straight connector on to it. The extend using 4 inch pipe. To connect to the toilet, use a bent pan connector with an 1 1/2 connector on the top.
Just noticed you need to connect a bath waste to it, chuck on of these onto the 4" pipe. Strap on Boss
Edited by Ricky_M on Thursday 5th February 18:52
Edited by Ricky_M on Thursday 5th February 18:53
Ricky_M said:
What is coming out of the floor?
If it is 4 inch soil pipe, you may need expose enough of the pipe so you can get a straight connector on to it. The extend using 4 inch pipe. To connect to the toilet, use a bent pan connector with an 1 1/2 connector on the top.

Just noticed you need to connect a bath waste to it, chuck on of these onto the 4" pipe. Strap on Boss

got that ricky, but specifically where the 4" soil pipe comes out of the new floor level, do i just cut the pipe off, and stick the pan connector into it, or is there some type of fitting that goes on the end of the soil pipe? what is a drain connector for?If it is 4 inch soil pipe, you may need expose enough of the pipe so you can get a straight connector on to it. The extend using 4 inch pipe. To connect to the toilet, use a bent pan connector with an 1 1/2 connector on the top.
Just noticed you need to connect a bath waste to it, chuck on of these onto the 4" pipe. Strap on Boss
Edited by Ricky_M on Thursday 5th February 18:52
Edited by Ricky_M on Thursday 5th February 18:53
unclemark123 said:
speedychrissie said:
unclemark123 said:
ive raised my bathroom floor by around 20"
what?maybe I am just being dappy today, but I cant think of one logical reason to do that. is there one?

mybrainhurts said:
unclemark123 said:
speedychrissie said:
unclemark123 said:
ive raised my bathroom floor by around 20"
what?maybe I am just being dappy today, but I cant think of one logical reason to do that. is there one?



Gassing Station | The Pie & Piston Archive | Top of Page | What's New | My Stuff



