3/4 size front plate fixing
3/4 size front plate fixing
Author
Discussion

RICHARDMEVANS

Original Poster:

12 posts

254 months

Friday 7th October 2005
quotequote all
hi guys anyone got a nifty way of attaching a 3/4 size front number plate onto the car? Do you use the standard bracket? someone said double sided carpet tape!

thanks

bogie

17,100 posts

302 months

Friday 7th October 2005
quotequote all
number plate sticky pads from Halfords...about £2

Wardey

42 posts

255 months

Friday 7th October 2005
quotequote all
Outdoor Velcro - also means a standard plate can be put back on if Mr. Plod takes a disliking to the small plate without any painful removal of sticky pads.

Just don't put the small plate straight back on again after they've given you the OK on the standard plate!

I've been using velcro for 3 years now, never had any problems.

MJK 24

5,679 posts

266 months

Friday 7th October 2005
quotequote all
Definately Velcro!

£3 from Halfords.

Also gives you a second chance if you don't stick it on straight first time.

S Works

10,166 posts

280 months

Friday 7th October 2005
quotequote all
Velcro

RICHARDMEVANS

Original Poster:

12 posts

254 months

Friday 7th October 2005
quotequote all
think il go with velcro.... cheers guys

jjcc

68 posts

266 months

Friday 7th October 2005
quotequote all
what.. velcro direct onto the clam? I don't have a plinth??

S Works

10,166 posts

280 months

Friday 7th October 2005
quotequote all
jjcc said:
what.. velcro direct onto the clam? I don't have a plinth??

Yep, exactamundo. On the bottom lip of the air-scoop. Job's a good'un

ju.

163 posts

259 months

Saturday 8th October 2005
quotequote all
Sticking in on number plates is never a good idea, i used to have it then someone taken off my number plates put them on there car done a petrol run i had the police at my door and had to prove it was not me, all number plates screwed on from then

FH

13 posts

264 months

Saturday 8th October 2005
quotequote all
Heavy duty velco is perfect... I used some on my 3/4 after losing my full size plate and tearing 2 big holes in the body work!!

Last i Looked B&* was slightly more pricey than halfrauds surprisingly!

... One other thing.... I was thinking of changing all my plates to those black & white ones... I know it's a little naughty but it'll look fab... anyone else done this... ?