Wheel bearing removal ?
Discussion
i've done bearings but not on the elise, basically you need a "bearing pusher" tool that cleanly whips it out of the hub & is also used for pushing the new one in nice & square. i got so hacked off trying to do it myslef i took the hub to my local garage at the time and they did it all for free greased up & all as it only takes a couple of mins with the right tool
bearing replaced now. That was quite a task !!!!
Got the hub off no problem but there was no way the bearing was going to come out. Nipped to a local back street garage I know. Took him 40 minutes to get the old bearing out and fit the new one and thats will the proper equipment !!! He only charged me £5 !! great place ! All now re-assembled and all the noise has gone. Just cant believe how worn out it was, it would hardly turn!! and to be in that state after 26,000 miles! previous owner must have tracked it a lot !
Next on the list is the fuel filter and brake fluid change. Any tips anyone??
Got the hub off no problem but there was no way the bearing was going to come out. Nipped to a local back street garage I know. Took him 40 minutes to get the old bearing out and fit the new one and thats will the proper equipment !!! He only charged me £5 !! great place ! All now re-assembled and all the noise has gone. Just cant believe how worn out it was, it would hardly turn!! and to be in that state after 26,000 miles! previous owner must have tracked it a lot !
Next on the list is the fuel filter and brake fluid change. Any tips anyone??
Sorry to dig up a REALLY old post guys, but I am going to need to change a front bearing pretty soon and was going to get one from Eliseparts..........but then I found a few threads on this and got the idea that it isn't that easy to do unless you have the proper removal tool. Does anyone know where I can get a bearing removal tool from? Eliseparts has a ball joint removal tool, but not a bearing removal tool. Does one exist? If so, any ideas where from and how much?
Any help on this would be good help. Cheers guys.
Any help on this would be good help. Cheers guys.
TheYeti said:
Sorry to dig up a REALLY old post guys, but I am going to need to change a front bearing pretty soon and was going to get one from Eliseparts..........but then I found a few threads on this and got the idea that it isn't that easy to do unless you have the proper removal tool. Does anyone know where I can get a bearing removal tool from? Eliseparts has a ball joint removal tool, but not a bearing removal tool. Does one exist? If so, any ideas where from and how much?
Any help on this would be good help. Cheers guys.
Any help on this would be good help. Cheers guys.
you will be able to remove the hubs pretty easily. Just make sure you have a very long ratchet spanner to remove the hub nut. They are on silly tight !!!!, it should come appart pretty easily. You will need a press to press the old bearing out and to press the new bearing in with. I took my hubs to a little local garage who had a press, They charged me £5 to take them out and put the new ones in. Overall, an easy job but the long ratchet spanner is vital !!!!!! and ofcourse the press !
Good luck.
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff





