Discussion
iguana said:
Guessing power level is around what it says on the tin then?
VVC?
Yup, 135. Non-VVC.
www.elises.co.uk/models/s2/135R/index.html
And I finally found someone with a 135R manual suppliment so let me share the following;
Geometry S2 111S S2 135R
Ride Hieight Front 130 120
Ride Height Rear 130 120
Front Castor optimum +3.8° +3.7°
Front Castor tolerance +3.5° to +4.1° +3.6° to +3.9°
Front Camber optimum -0.1° 0°
Front Camber tolerance +0.1° to -0.3° 0° to 0.2°
Front alignment optimum 0.2mm out 0 mm
Front alignment tolerance 0.5mm out to 0.7 in 0mm to 0.2 out
Rear Camber optimum -1.8° -1.8°
Rear Camber tolerance -1.5° to -2.1° -1.8° to -2.0°
Rear alignment optimum 1.2mm in 1.2mm in
Rear alignment tolerance 1.2mm in to 1.8 in 1.1mm in to 1.3 in
Bump Steer Dunno 2.0° to 2.5° in
Cold Tyre Pressures 26/27.5 26/28
Editied to say FFS I spent a heap of time in the fixed font editor getting the columns to line up and its all over the place in the proportional font forum. Arse, then I spend aload more time putting spaces in and it still donest line up. If you want an excel table email me.
>> Edited by hbaumhardt on Monday 23 January 22:16
Geometry S2 111S S2 135R
Ride Hieight Front 130 120
Ride Height Rear 130 120
Front Castor optimum +3.8° +3.7°
Front Castor tolerance +3.5° to +4.1° +3.6° to +3.9°
Front Camber optimum -0.1° 0°
Front Camber tolerance +0.1° to -0.3° 0° to 0.2°
Front alignment optimum 0.2mm out 0 mm
Front alignment tolerance 0.5mm out to 0.7 in 0mm to 0.2 out
Rear Camber optimum -1.8° -1.8°
Rear Camber tolerance -1.5° to -2.1° -1.8° to -2.0°
Rear alignment optimum 1.2mm in 1.2mm in
Rear alignment tolerance 1.2mm in to 1.8 in 1.1mm in to 1.3 in
Bump Steer Dunno 2.0° to 2.5° in
Cold Tyre Pressures 26/27.5 26/28
Editied to say FFS I spent a heap of time in the fixed font editor getting the columns to line up and its all over the place in the proportional font forum. Arse, then I spend aload more time putting spaces in and it still donest line up. If you want an excel table email me.
>> Edited by hbaumhardt on Monday 23 January 22:16
hbaumhardt said:
Take a 111S and install sports suspension, an uprated ARB, A048s and a CR gearbox then you got yourself a 160R ... I'm 25% of the way there !
Expensive way to do it - get a 135R (cheaper 2nd hand) and stick some cams in 160R!!
Guy on SELOC has one with a hurricane, 4 into 2 into 1 and backbox doing 154bhp.
C/r gears make all the difference
I had no problems keeping up with 111R's until over 100mph. Susp is a bit extreme but comes into its own on track. I have the Lotus promo sheet and can email if interested (email in my profile) Mine is one of 4 rumoured blue cars not to have suffered HGF. 20k on the clock 5k of which was the previous owner on the gumball. Pic in my profile.....
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff


