S1 Alternator Belt
Discussion
1. Jack up drivers side
2. Remove O/S/R wheel and arch liner
3. Loosen 15mm nuts on top pivot bolt and the bolt through the slider at the bottom.
4. Turn adjuster bolt (8mm head) clockwise to tighten belt
5. Retighten two 15mm nuts
6. Replace arch liner and wheel
HTH
Dan
Jude Performance Services Ltd.
>> Edited by djroadboy on Wednesday 3rd May 22:41
2. Remove O/S/R wheel and arch liner
3. Loosen 15mm nuts on top pivot bolt and the bolt through the slider at the bottom.
4. Turn adjuster bolt (8mm head) clockwise to tighten belt
5. Retighten two 15mm nuts
6. Replace arch liner and wheel
HTH
Dan
Jude Performance Services Ltd.
>> Edited by djroadboy on Wednesday 3rd May 22:41
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff


