HELP - ALARM knackered! (reply to this one)
Discussion
ok guy's i got my S2 elise serviced yesterday at jude performance who confirmed that the alarm siren is knackered as i kinda suspected due to there being no noise when the alarm goes off (just flashing indicators and an imobilised elise).
now Dan had told me how to get into the siren to replace it which i attempted today - unsucessfully cos the siren isn't where we expected it to be. i removed the wheel arch lining from the front passengers side and although i managed to find a couple of fuse boxes and the horn i didn't see any sign of the alarm siren!
so here's my question - how can i fit the replacement siren? can anyone tell me either there the existing non functioning siren is? or alternatively which wires to splice into to power the new siren? i spent about an hour with an ampmeter trying to find the right wires but again was left thoroughly pi55ed off and my car still doesn't have an alarm which makes an noise. so any help would be very much appreciated cos i'm at my wits end now
many thanks
ninja
now Dan had told me how to get into the siren to replace it which i attempted today - unsucessfully cos the siren isn't where we expected it to be. i removed the wheel arch lining from the front passengers side and although i managed to find a couple of fuse boxes and the horn i didn't see any sign of the alarm siren!
so here's my question - how can i fit the replacement siren? can anyone tell me either there the existing non functioning siren is? or alternatively which wires to splice into to power the new siren? i spent about an hour with an ampmeter trying to find the right wires but again was left thoroughly pi55ed off and my car still doesn't have an alarm which makes an noise. so any help would be very much appreciated cos i'm at my wits end now
many thanks
ninja

there is a fuse for the siren in the fuse box n/s cover .
i assume you have an identical siren to replace the dead one ?
if you do it will be a case of making three connections 12v- earth- data wire ( coded link wire cont by alarm ) some times they are just a neg trip , but because the one fitted to the lotus is a cat 1 it prob will not .
when you start make sure that none of the wires touch !
i assume you have an identical siren to replace the dead one ?
if you do it will be a case of making three connections 12v- earth- data wire ( coded link wire cont by alarm ) some times they are just a neg trip , but because the one fitted to the lotus is a cat 1 it prob will not .
when you start make sure that none of the wires touch !
Up in the passenger footwell iirc. Crawl in and have a look. After that, and once you are done, might I suggest:
www.chiropracters_are_us.com
www.chiropracters_are_us.com

Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff



