Replacing nose badge
Discussion
I've seen people with other car marques use fishing line to run behind the badge which gets it off quite well without scratching the paint work at all. Then use something appropriate to get the remaining stickyness off and bob's your uncle!!
Was thinking the same thing to myself actually; badge on boot looks great, on nose looks dull (and stone chipped!)
Was thinking the same thing to myself actually; badge on boot looks great, on nose looks dull (and stone chipped!)
jago said:
also is it easy to remove the queen's export 'e' sticker from the side of an s2? (i'm not planning on replacing it with a new one..)
Couldn't agree more!
That sticker looks horrific, particularly as Zymol etc... catch's against the edges of it.
>> Edited by Joe - Exige S on Wednesday 31st May 09:45
For removing the nose badge try a little WD40 around the top edge (so it soaks through the foam backing). In most type car badges this renders the glue ineffective, should pull right off after a couple of minutes (maybe with a gentle twist checking its loosened up first).
this trick has worked on a few other cars I've owned.
this trick has worked on a few other cars I've owned.
TonyHetherington said:
get a hairdryer on the queens sticker thingy to soften it (and the glue beneath it) up, and peel it slowly - then polish the area and wax, job's a good un!!!
(I think they look rubbish too)
Just did this 'mod' - it literally took a couple of minutes, and the hot weather/paint I am sure helped. A big improvement. Car looks much less fussy without the queen's hat!
>> Edited by Skyman on Wednesday 31st May 17:01
Skyman said:
TonyHetherington said:
get a hairdryer on the queens sticker thingy to soften it (and the glue beneath it) up, and peel it slowly - then polish the area and wax, job's a good un!!!
(I think they look rubbish too)
Just did this 'mod' - it literally took a couple of minutes, and the hot weather/paint I am sure helped. A big improvement. Car looks much less fussy without the queen's hat!
>> Edited by Skyman on Wednesday 31st May 17:01
Don't forget to inform your insurance company of this non approved mod - it'll go much faster now without the extra weight too!

purpleperil said:
Skyman said:
TonyHetherington said:
get a hairdryer on the queens sticker thingy to soften it (and the glue beneath it) up, and peel it slowly - then polish the area and wax, job's a good un!!!
(I think they look rubbish too)
Just did this 'mod' - it literally took a couple of minutes, and the hot weather/paint I am sure helped. A big improvement. Car looks much less fussy without the queen's hat!
>> Edited by Skyman on Wednesday 31st May 17:01
Don't forget to inform your insurance company of this non approved mod - it'll go much faster now without the extra weight too!
I reckon with the reduced weight and improved Cd, I'd probably now beat a Honda'd car

Skyman said:Humm..? Why was there one on the side of your SR in the first place Simon? Mine didn't have one... which is nice!
Just did this 'mod' - it literally took a couple of minutes, and the hot weather/paint I am sure helped. A big improvement. Car looks much less fussy without the queen's hat!
Janitor said:
Skyman said:Humm..? Why was there one on the side of your SR in the first place Simon? Mine didn't have one... which is nice!
Just did this 'mod' - it literally took a couple of minutes, and the hot weather/paint I am sure helped. A big improvement. Car looks much less fussy without the queen's hat!
Clive, remember that I ended up with a polar blue 111R rather than an SR.
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff




