MOT Failure!!!
Author
Discussion

elise111s

Original Poster:

13 posts

246 months

Friday 14th July 2006
quotequote all
Just had my S2 111S (52reg) put through it's first MOT since i have owned it and it failed!! :-( It failed on the emissions test:

Fast idle test: 1st test - CO 12.79% vol
2nd test - CO 12.63% vol

Any ideas of what the problem is that has causd these riduculous readings??? And how to rectify it? I was told that 0.3% vol for CO is normal! Help!

Many thanks in advance,

Martyn

hbaumhardt

950 posts

310 months

Friday 14th July 2006
quotequote all
Lambda sensor or knackered cat ? If the MOT emissions bloke didnt say "and thats generally caused by ..." then you'll be needing a specialist on this.

stampede

266 posts

249 months

Friday 14th July 2006
quotequote all
Do you have a CRP?

If so, put the CAT back on and try again.

S690

elise111s

Original Poster:

13 posts

246 months

Friday 14th July 2006
quotequote all
MOT guy didn't have a clue and was as speechless as me when i saw the results! He said that it seemed as if the engine was getting to much fuel and it wasn't being burnt?? Getting a specialist in as soon as possible, just wondered if anybody had any ideas so I can budget for the hole that's about to appear in my trouser pocket!

Car is a standard 111S apart from a K&N air filter used instead of lotus air box etc.

Many thanks for all your help and suggestions,

Martyn

callet

32 posts

259 months

Saturday 15th July 2006
quotequote all
I have a 111s S1 and had the same problem with the last MOT.
It was the Lamda sensor and had to be replaced. CAT was also poisoned and had to go...

Edited by callet on Saturday 15th July 21:39