One thing after another, now i have no indicators!
Discussion
Guys,
For some reason my indicators now no longer work - only realised when I tried to put my hazards on yesterday.
I had been wondering why so many people had been getting agro with me - I originally put it down to jealousy!
Anyway, is this something that has happened to anyone else? Is it an easy fix?
Cheers
MR
For some reason my indicators now no longer work - only realised when I tried to put my hazards on yesterday.
I had been wondering why so many people had been getting agro with me - I originally put it down to jealousy!
Anyway, is this something that has happened to anyone else? Is it an easy fix?
Cheers
MR
The fuse box is located under the front panel on the passenger side, its under a black deflector shield. However this happened to me and it was not the fuse, i had knocked the hazard warning switch getting in/out. not enough to set the hazads off but enough to stop the indicators working, check this first before going to the fuse box as it can be a bit fiddly (well i found it a bit fiddly, but then again i'm useless at things like that)
Hope you get it sorted
Tanman
Hope you get it sorted
Tanman
more than likely the hazzord switch. Its about the only thing that cann cause this fault. The only reason the fuse would blow is if you had been fiddling with the indicator wires and shorted them out.
Have you used the hazzord switch recently? If so then that will be it. Try fiddling about with the switch while one of your indicators is on and sif they come on.
Have you used the hazzord switch recently? If so then that will be it. Try fiddling about with the switch while one of your indicators is on and sif they come on.
Dave_s2_111s said:
more than likely the hazzord switch. Its about the only thing that cann cause this fault. The only reason the fuse would blow is if you had been fiddling with the indicator wires and shorted them out.
Have you used the hazzord switch recently? If so then that will be it. Try fiddling about with the switch while one of your indicators is on and sif they come on.
Have you used the hazzord switch recently? If so then that will be it. Try fiddling about with the switch while one of your indicators is on and sif they come on.
Yep, its the hazard switch - it'll be in the on position, but not actually on, thus preventing your indicators from working.
Push it in again to turn it off.
Happened to me a few months back - scared the hell outta me, was thinking ££££....

I had this the other day (from SELOC): "Odd problem. With the hazard warning button in its backlight is on and the indicators work. Press the hazard warning button so it pops out, the backlight goes out no hazard warnings and the indicators dont work. Do we recon its a) the switch or b) the relay (and where is the relay) ?"
Turned out it was the switch which I managed to fix by cleaning with electrical solvant (a new one # A340M6016F is only £12) but it is glued in from the back so you need to cut thru the glue to remove and re bond it when finished.
Edit to say that the hazards not working is an MOT fail and the cops can ticket you for this if you are at the side of the road.
Turned out it was the switch which I managed to fix by cleaning with electrical solvant (a new one # A340M6016F is only £12) but it is glued in from the back so you need to cut thru the glue to remove and re bond it when finished.
Edit to say that the hazards not working is an MOT fail and the cops can ticket you for this if you are at the side of the road.
Edited by hbaumhardt on Monday 17th July 09:04
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff




