Grille mounting screws
Discussion
I took the rear grilles off my car for a sandblasting and a respray as they were looking a bit tatty, and they were only held on with one dodgy machine screw and grommet arrangement on each. I bought some of the plastic clips and screws from Eliseparts which I thought were the same as the ones used elsewhere on my car, but they are too small and don't clip into the holes in the clam.
Anyone know where I can get some that fit?
Anyone know where I can get some that fit?
I got mine from Bell & Colvill (www.bell-colvill.co.uk)not sure if they're listed in the Online Parts shop - I just phoned them and described the parts I was looking for and they sent me them pretty quickly for around £10 all in...
I've just done the same job as you and i got some rawlnuts from here
www.fwb.co.uk/mall/productpage.cfm
I bought some M5x20 mm screw and they fit perfectly. They also work out a lot cheaper than buying them from Lotus and other lotus specific suppliers. trying to be tactful here!!
HTH
www.fwb.co.uk/mall/productpage.cfm
I bought some M5x20 mm screw and they fit perfectly. They also work out a lot cheaper than buying them from Lotus and other lotus specific suppliers. trying to be tactful here!!
HTH
Edited by tom_allen on Saturday 29th July 21:09
greysquirrel said:
mine was missing the grills and just bought some from ebay, but need the mount screws.
Site is good but £16 postage for £2 worth of screws!! lol
Site is good but £16 postage for £2 worth of screws!! lol
Looking back on this one I realise I was getting confused with a set of the plastic screw fittings for the wheel arch liners... can't remember exactly how much the grill ones were as I'd ordered them along with some other items - apologies to all (esp the guys at B&C)

Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff




