Removing dash facia S2?
Removing dash facia S2?
Author
Discussion

Davislove

Original Poster:

2,295 posts

277 months

Friday 4th August 2006
quotequote all
I will need to remove the dash top facia (the alcantara trimmed bit) on my S2 for re-trimming soon, any ideas how to go about getting it off? Service notes drew a blank

thanks

karll

59 posts

271 months

Friday 4th August 2006
quotequote all
do you mean the part with the air vents which fire into the front windscreen .

If so you will need to remove the four vents , these are held in by
screws , at each side you will need to remove the two torx screws so the pannel can be moved towards you ( the pannel with the face air vents / speakers -on some cars only ) .
Once the above is done you will see another two screws at each edge which are cross heads .

hope this is of some help .

Davislove

Original Poster:

2,295 posts

277 months

Saturday 5th August 2006
quotequote all
karll said:
do you mean the part with the air vents which fire into the front windscreen .

If so you will need to remove the four vents , these are held in by
screws , at each side you will need to remove the two torx screws so the pannel can be moved towards you ( the pannel with the face air vents / speakers -on some cars only ) .
Once the above is done you will see another two screws at each edge which are cross heads .

hope this is of some help .


no, I mean the trimmed part on top that meets it