Discussion
Ok, having purchased my standard (bar the Janspeed zorst) elise s1 in May, the transformation continues -
I've had it in for an A checkup
I've smothered it in Pistonheads stickers and decals
I've replaced the knackered rear Konis
I've replaced the knackered boot release cable
I've got the induction kit bought - to be fitted tonight
I've got the new tyres - T1R Proxes, to be fitted this weekend
I've done 5500 miles in 3 and a bit months.
I'm considering a decat - we'll see after the induction kit's been fitted if I can get away with it!
Next up - the brakes. The current rears are nearly shot, but the fronts are in A1 nick. I want to replace the lot and just sell the standard fronts on to someone who may need them. So far I'm most likely to be going down the
EBC Turbo grooved discs
Mintex 1144 pads
route - anybody have this actual setup? Unfortunately I can't stretch to AP / Pagid kit at the mo...
On another note, I notice the throttle sticks open if I rev hard while parked, takes about a week to come down if revved above a certain point - is this the solution?
www.eliseparts.com/shop/index.php?main_page=product_info&products_id=607
Cheers all!
I've had it in for an A checkup
I've smothered it in Pistonheads stickers and decals
I've replaced the knackered rear Konis
I've replaced the knackered boot release cable
I've got the induction kit bought - to be fitted tonight
I've got the new tyres - T1R Proxes, to be fitted this weekend
I've done 5500 miles in 3 and a bit months.
I'm considering a decat - we'll see after the induction kit's been fitted if I can get away with it!
Next up - the brakes. The current rears are nearly shot, but the fronts are in A1 nick. I want to replace the lot and just sell the standard fronts on to someone who may need them. So far I'm most likely to be going down the
EBC Turbo grooved discs
Mintex 1144 pads
route - anybody have this actual setup? Unfortunately I can't stretch to AP / Pagid kit at the mo...
On another note, I notice the throttle sticks open if I rev hard while parked, takes about a week to come down if revved above a certain point - is this the solution?
www.eliseparts.com/shop/index.php?main_page=product_info&products_id=607
Cheers all!
Edited by jaykaybi on Wednesday 16th August 15:25
get the aluminium TB to fix the sticky throttle issue. I have done that to my Elise and it works great. I also have a replacement throttle bush.
Link to TB:
www.eliseparts.com/shop/index.php?main_page=product_info&products_id=238
Link to TB:
www.eliseparts.com/shop/index.php?main_page=product_info&products_id=238
Check over on SELOC, EBC and Mintex seem to be a good fast road compromise - stopping power per pound. As a pure coincidence I've just been in to my local independant tyre and zorst place
to check EBC prices and was told that EBC have just launched a new disk with a revised groove pattern, quieter than the old turbo groove, new black coating which the bumf says will not peel from the non swept area. The pic looked pretty good and it is available for the Elise, just waiting on a call back with a price. Obviously I can't comment on performance but the dealer also told me that the Grrenstuff pad compound has been revised because, in his words, it was s*!@, so may be back as a contender.
to check EBC prices and was told that EBC have just launched a new disk with a revised groove pattern, quieter than the old turbo groove, new black coating which the bumf says will not peel from the non swept area. The pic looked pretty good and it is available for the Elise, just waiting on a call back with a price. Obviously I can't comment on performance but the dealer also told me that the Grrenstuff pad compound has been revised because, in his words, it was s*!@, so may be back as a contender.
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff


