Noise from vvc block when cold, sounds like no oil in engine
Discussion
Not sure if this is normal or not.
Started my liz from cold tonight and it sounded like a train was coming in.
My first thoughts were that i had lost all engine oil and it was running dry as it sounded like metal on metal.
After about a minute or so it cleared. It seemed to be coming from the vvc area.
I have been experiencing a small grinding/vibrating noise while driving but i assumed it was a vibrating heat shield etc: Ive not been able to track it down but its not really bothering me but i thought id mention it incase it is of any relevance of the above.
Im a little unsure how the vvc works so excuse me if i sound like a novice. Ive just never had any experience of this problem before.
Any help apreciated.
Thanks
Dave
Started my liz from cold tonight and it sounded like a train was coming in.
My first thoughts were that i had lost all engine oil and it was running dry as it sounded like metal on metal.
After about a minute or so it cleared. It seemed to be coming from the vvc area.
I have been experiencing a small grinding/vibrating noise while driving but i assumed it was a vibrating heat shield etc: Ive not been able to track it down but its not really bothering me but i thought id mention it incase it is of any relevance of the above.
Im a little unsure how the vvc works so excuse me if i sound like a novice. Ive just never had any experience of this problem before.
Any help apreciated.
Thanks
Dave
Have you checked your oil level and is that ok?
The VVC does tend to sound a little 'industrial' next to the std Elise engine. However, if yours has got noisy all of a sudden, that's a bit suspicious.
Not 100% sure how the VVC works, however, on Alfa twin sparks, there's a 'variator' which does the variable valve timing. When this goes wrong, they sound like a diesel basically.
The VVC does tend to sound a little 'industrial' next to the std Elise engine. However, if yours has got noisy all of a sudden, that's a bit suspicious.
Not 100% sure how the VVC works, however, on Alfa twin sparks, there's a 'variator' which does the variable valve timing. When this goes wrong, they sound like a diesel basically.
Funny you should say a slack belt as that would make sense. The noise is coming from the left of the unit around by the head (looking from the back of the car) were i can see another cam cover. Not the timing cams as they are on the right.
Might whip it off tomorrow and have a gander!
I dont think it can be a mojor issue if anything.
Not yet 3 years and 10000 miles so id be pi**ed if it was a major problem.
Thanks Dave
Might whip it off tomorrow and have a gander!
I dont think it can be a mojor issue if anything.
Not yet 3 years and 10000 miles so id be pi**ed if it was a major problem.
Thanks Dave
Dave_s2_111s said:
Funny you should say a slack belt as that would make sense. The noise is coming from the left of the unit around by the head (looking from the back of the car) were i can see another cam cover. Not the timing cams as they are on the right.
Might whip it off tomorrow and have a gander!
I dont think it can be a mojor issue if anything.
Not yet 3 years and 10000 miles so id be pi**ed if it was a major problem.
Thanks Dave
Might whip it off tomorrow and have a gander!
I dont think it can be a mojor issue if anything.
Not yet 3 years and 10000 miles so id be pi**ed if it was a major problem.
Thanks Dave
I could be wrong. But doesn't the VVC have a belt on either end?
dave_s2_111s said:
Ive no idea but im going to have a look.
Not a clue how it works but i can usually stumble my way through these sort of things.
Was wondering if it could be a bearing maybe on the pulley the belt runs on?
Who knows, ill know later anyway
Thanks
Dave
Not a clue how it works but i can usually stumble my way through these sort of things.
Was wondering if it could be a bearing maybe on the pulley the belt runs on?
Who knows, ill know later anyway
Thanks
Dave
Hi Dave, I've got the full printed workshop manual at home, which includes all the K-series engine variants, so if you need to know something specific drop me an email and I'll look it up for you.
Dave_s2_111s said:
Does anyone know when the vvc works?
Ie: Does it only work at a particular revv range or temperature or timed etc:
Any anoraks on this more than welcome!
Thanks
Dave
Ie: Does it only work at a particular revv range or temperature or timed etc:
Any anoraks on this more than welcome!
Thanks
Dave
I know it's continuously variable as opposed to Honda V-tec.
How it senses load I could speculate but I don't know for sure. Airflow, crank speed and temps - a combination of at least. Have you done a google? (so I don't have to?!)
gets better
http://forums.mg-rover.org/showthread
Reading a few of the rover forums it looks as if the vvc can be a little noisy occasionally.
Some said if they loose about 200ml of oil the noise appears, as if its not lubricated. This was the sound i heard im sure.
Once topped up the noise dissapears.
To be honest my engine oil is so damn clean i can hardly tell the level.
Its only done about 1800 since its last service.
Think ill try and get a more acurate oil level reading and top up if its low.
It definately doesnt have a leak because i couldnt believe how clean the underside of the engine was when i was fitting the larini zaust.
Anyway any more news and ill post it straight away
Dave
http://forums.mg-rover.org/showthread
Reading a few of the rover forums it looks as if the vvc can be a little noisy occasionally.
Some said if they loose about 200ml of oil the noise appears, as if its not lubricated. This was the sound i heard im sure.
Once topped up the noise dissapears.
To be honest my engine oil is so damn clean i can hardly tell the level.
Its only done about 1800 since its last service.
Think ill try and get a more acurate oil level reading and top up if its low.
It definately doesnt have a leak because i couldnt believe how clean the underside of the engine was when i was fitting the larini zaust.
Anyway any more news and ill post it straight away
Dave
Dave_s2_111s said:
so, can obviously see how it's modulated. the signal that drives it though isn't going to be in pics.
Not sure they would have it mapped as per the VVTLi in the Exige S. Probably something simple, clever things usually are. I'll try and have a look later.
I knew I read how VVC works, found it fascinating how the V-TEC in my Civic worked. Very clever yet also very simple!!
Heres a link to a site that explains how the VVC
www.sandsmuseum.com/cars/elise/the
HTH
Tom
Heres a link to a site that explains how the VVC
www.sandsmuseum.com/cars/elise/the
HTH
Tom
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff




