where to buy hard top and how to tell its a 111R ?
where to buy hard top and how to tell its a 111R ?
Author
Discussion

scotte

Original Poster:

372 posts

265 months

Tuesday 22nd August 2006
quotequote all
1. where can i purchase a hard top for the 111R and how much are they ?

2. what obvious differences are there between the 111R compared to any S2 ?

i.e 111R on rear etc.. ?

Thanks for your time
Scott

cjfc

38 posts

247 months

Tuesday 22nd August 2006
quotequote all
i got mine by putting a wanted add up on seloc. had a reply from someone within a couple of minutes who could source a second hand but never used 111r hard top in the correct colour. may have cost me an extra £50 doing it this way but certainly saved any hassle factor

as for your second question, not really sure. the fittings may have changed slightly but i'm somebody more knowledgable than i will be along to shortly to help.

Christian

Sam_68

9,939 posts

276 months

Tuesday 22nd August 2006
quotequote all
You can get a genuine hardtop via any Lotus Dealer for around £1500. Other than that, look out for one second hand via the usual sources (Pistonheads & SELOC classifieds, Ebay).

The most obvious external difference is the 111R sticker on the front clamshell:

The other obvious difference is the Toyota engine, which in turn means that you will find six speeds on the gearbox instead of 5.

Edited by Sam_68 on Tuesday 22 August 09:11

pss1

339 posts

289 months

Tuesday 22nd August 2006
quotequote all
I'm not sure if this is a sure fire way of telling a K-series engined S2 from a 111R (Toyota engined), but the radiator in a 111R sits higher within the front clam. Also, the central slat / divider on the front clam is solid on an S2, whereas there is a gap underneath on a 111R.

If you see a S2 and a 111R side by side, you'll see what I mean.

gooby

9,269 posts

265 months

Tuesday 22nd August 2006
quotequote all
'Zorst. 111R exhaust exits the car through the undertray. K series exits from the rear grill, but then so do hooonda cars...

kevin ritson

3,423 posts

258 months

Tuesday 22nd August 2006
quotequote all
Plus the service panels on a 111R have a bend in them - the K ones are one continuous flat diagonal slant down to the grilles.

Also, the 12V socket is between the seats on an R, with a cubby hole above it but you should be able to tell the difference by now!

Edited by kevin ritson on Tuesday 22 August 09:50

scotte

Original Poster:

372 posts

265 months

Tuesday 22nd August 2006
quotequote all
thanks.

i assume the engine doesnt actually say TOYOTA on it then

gooby

9,269 posts

265 months

Tuesday 22nd August 2006
quotequote all
scotte said:
thanks.

i assume the engine doesnt actually say TOYOTA on it then


Nope it says Lotus and down the side of the engine where you cant see it it says Yamaha.

kevin ritson

3,423 posts

258 months

Tuesday 22nd August 2006
quotequote all
gooby said:
scotte said:
thanks.

i assume the engine doesnt actually say TOYOTA on it then


Nope it says Lotus and down the side of the engine where you cant see it it says Yamaha.


And the inlet and exhaust are on the opposite sides to the Rover unit.