How important are RE040 Dot codes?
How important are RE040 Dot codes?
Author
Discussion

MRTOAD

Original Poster:

117 posts

243 months

Tuesday 22nd August 2006
quotequote all
I am in the process of sourcing a pair of Bridgestone Potenza RE040's for the rear. I understand that DCK is the Lotus specific DOT code. At present the DOT code of my tyres appears to be BZ. Dream Machines have offered me a pair of BZ's for £260. Should I go ahead or track down some DCK's?

gooby

9,269 posts

265 months

Tuesday 22nd August 2006
quotequote all
The code is very important, especially if you are only changing half the tyres. I dont know the code, call a lotus dealer.

Better still get rid of the rubbish bridgestones and get Advan LTS.

jfrf

406 posts

285 months

Tuesday 22nd August 2006
quotequote all
didnt think the code was that important

the vx220 has different codes from lotus yet in reality there is no noticeable difference when driving

MRTOAD

Original Poster:

117 posts

243 months

Tuesday 22nd August 2006
quotequote all
Thanks for the advice chaps. As I am only replacing the rears I will stick with BZ's. National Tyres have just quoted me £244 for a pair.

When it comes to replacing all four I'll consider the Yokohama Advans or maybe some Toyo Proxy TR-R's.

trondhb

55 posts

262 months

Tuesday 22nd August 2006
quotequote all
Dunlop SP9000 are another option. I have 4 of those on my S2 and they are really good. Much better than the Bridgestones especially in the wet and quite affordable too.

ulakye

163 posts

259 months

Tuesday 22nd August 2006
quotequote all
The way it was explained to me originally is that there are 4 cars that use these tyres :-

Elise
VX220
Imprezza
TT

The difference between these cars is weight and hence the heavier the car, the stiffer the sidewall. As the Elise is the lightest then you can use any of the tyres but the stiffer the sidewall, the harder the ride.

kevin ritson

3,423 posts

258 months

Tuesday 22nd August 2006
quotequote all
VX220 Tyres make little if no difference but as above, make sure both rears match. The new AD07s seem to be pretty good value at just over £430 a set (was expecting '48 prices!) but are difficult to source from the usual tyre places at the moment. It's a good tyre, too.

Toyos as a Bridgestone alternative - very much a marmite tyre. The sidewalls are very flexible and this affects turn-in. I've heard the alternative one to the '48s is OK, though (sorry can't remember the names)

jaykaybi

3,494 posts

252 months

Tuesday 22nd August 2006
quotequote all
kevin ritson said:

Toyos as a Bridgestone alternative - very much a marmite tyre. The sidewalls are very flexible and this affects turn-in. I've heard the alternative one to the '48s is OK, though (sorry can't remember the names)


You're thinking of the R888s I believe.


By the way, I just fitted Toyo Proxes T1-R tyres all round on my S1 and got a very significant performance increase compared with the Michelins the previous owner had put on. Each to their own of course, but I wouldn't knock the Toyos at all.

Edited by jaykaybi on Tuesday 22 August 14:29

hbaumhardt

950 posts

310 months

Tuesday 22nd August 2006
quotequote all
For the RE040 rears DCK is the Elise specific code. CFE is for the slighly heavier VX220 and is fine to run at 26psi to allow for the harder sidewalls, I have experience of these running on the limit on track and they are fine.

I have no knowledge of running with the saloon car spec BZs and would suggest that bearing in mind their target audience they are probably not OK. EDIT: to say, sorry I always assume track, they are probably fine for road use.

Edited by hbaumhardt on Tuesday 22 August 15:16

shangani

3,069 posts

268 months

Tuesday 22nd August 2006
quotequote all
MRTOAD said:
I am in the process of sourcing a pair of Bridgestone Potenza RE040's for the rear. I understand that DCK is the Lotus specific DOT code. At present the DOT code of my tyres appears to be BZ. Dream Machines have offered me a pair of BZ's for £260. Should I go ahead or track down some DCK's?


Personally I think that is a bit of a ripoff. You can get a full set of tyres from Brackell tyre for ~£300. They will be CFE rears which is the VX spec - same compound as the DCKs, with a slightly stiffer sidewall. Reduce pressures by 2 psi and they are fine. The BZ tyres are totally wrong for the elise (has been discussed on seloc) - designed for a far heavier car. The CFE's even get the lotus guys to agree they are fine. I have had them for 12K miles and they are identical to the DCK's in handling terms.

In summary get DCK rears or CFE rears which will be a lot cheaper. BZ rears for £260 - way overpriced.

kevin ritson

3,423 posts

258 months

Tuesday 22nd August 2006
quotequote all
TBH I run CFEs on the rear of mine at the standard 27.5psi pressure - they perform just as well as the original DCKs. If anything the kit on a 111S means they run somewhere between the weight of an original S2 with 120bhp and a VX and I've personally never been keen on running tyres under pressure.

shangani

3,069 posts

268 months

Tuesday 22nd August 2006
quotequote all
kevin ritson said:
TBH I run CFEs on the rear of mine at the standard 27.5psi pressure - they perform just as well as the original DCKs. If anything the kit on a 111S means they run somewhere between the weight of an original S2 with 120bhp and a VX and I've personally never been keen on running tyres under pressure.


The running the CFE rears at about 26 psi or 2 less than standard was the advice of Lotus technical, not something we just invented.

kevin ritson

3,423 posts

258 months

Wednesday 23rd August 2006
quotequote all
shangani said:
kevin ritson said:
TBH I run CFEs on the rear of mine at the standard 27.5psi pressure - they perform just as well as the original DCKs. If anything the kit on a 111S means they run somewhere between the weight of an original S2 with 120bhp and a VX and I've personally never been keen on running tyres under pressure.


The running the CFE rears at about 26 psi or 2 less than standard was the advice of Lotus technical, not something we just invented.


Appreciate that Andrew, and to give credit where it's due you've made this clear in the past. It's just a matter of personal preference and I don't feel the back end skips around any more at normal pressures. Plus advice from Lotus includes telling people not to use the six-spoke wheels on a 111S because "the car's too heavy", yet consider the DCK's fine...then fit the 6-spokers to the new Elise S. Can't imagine they had them re-engineered, but I'm happy to be corrected.

hbaumhardt

950 posts

310 months

Wednesday 23rd August 2006
quotequote all
Just check the tyre wear against my handy tyre wear guide (on another thread not so long ago) to find the most appropriate pressure 24 to 28 isnt going to make a bunch of difference to road handling, just wear.

mrtoad

Original Poster:

117 posts

243 months

Thursday 24th August 2006
quotequote all
I had the tyres fitted yesterday and as it turned out they were DCK's after all. On closer inspection I noticed that they do have BZ as part of another code as did my old tyres. It seems I may have got confused between the two.

S Works

10,166 posts

281 months

Thursday 24th August 2006
quotequote all
jaykaybi said:
kevin ritson said:

Toyos as a Bridgestone alternative - very much a marmite tyre. The sidewalls are very flexible and this affects turn-in. I've heard the alternative one to the '48s is OK, though (sorry can't remember the names)


You're thinking of the R888s I believe.


By the way, I just fitted Toyo Proxes T1-R tyres all round on my S1 and got a very significant performance increase compared with the Michelins the previous owner had put on. Each to their own of course, but I wouldn't knock the Toyos at all.

All Toyo's are known to suffer more sidewall flex than their Yoko counterparts. Sure the T1-R is a better tyre for the S1 Elise than a Michelin, as is the BFG profiler if you're on a budget. Both perform very well in the wet in fact. I had no issues with the T1-R on my S1 Sport 160 until I got them very hot hooning around at North Weald, at which point the sidewall flex was more evident and blurred the limit of grip more.

The Yoko Advans really are a league above, but the price reflects that.

TonyHetherington

32,091 posts

281 months

Thursday 24th August 2006
quotequote all
mrtoad said:
I had the tyres fitted yesterday and as it turned out they were DCK's after all. On closer inspection I noticed that they do have BZ as part of another code as did my old tyres. It seems I may have got confused between the two.


So you've got the pucker ones, well done sir thumbup

I did exactly the same as you - considered many others but in the end just replaced them with exactly with what they came with, as I was so happy with the handling and life I got from the tyres (12k which I thought was good considering the amount of hoon miles I do).