Chassis costs
Author
Discussion

jkyle69

Original Poster:

237 posts

271 months

Thursday 24th August 2006
quotequote all
How much should I pay for a second hand chassis and frame for an Elise (and any ideas where I can get one from......)

crackthatoff

3,314 posts

244 months

Thursday 24th August 2006
quotequote all
theres a dinged s2 on -ebay at the moment going for 5k !!

anonymous-user

85 months

Thursday 24th August 2006
quotequote all
I was hoping there would be some posts here?...

I have left TVR world and currently researching owning an Elise, I searched the forum on this subject before doing a post on chassis but theres no info on costs, repairs etc... so can anybody help?

If you damage the chassis is it really a scrap it job or do people repair them?

Any info here would be helpful as this is my concearn area, as you know chassis repairs to Tivs are easy...

Cheers

FB

sp60

524 posts

290 months

Thursday 24th August 2006
quotequote all
Damaged chassis needs replacing AFAIK.
Unless your happy to do all the work yourself it'll generally be a write off.
Having said that I'm sure there are a few elise on the road with damaged chassis that were supposed to have been replaced. I would not want to be driving around in one though!
From memory I seem to remember the chassis is around the 6k mark.
Your best off speaking to lotus direct about a replacement. Anything that you get off ebay is likely to have been damaged. I'm guessing, but I suspect it is the majority cause of a write offs, as replacement clams and other parts should come in under write off value.

Paul RN

1,168 posts

245 months

Thursday 24th August 2006
quotequote all
The chasis cannot be repaired very easily and generally write off the car. I think they are around 9k from Lotus.

*edit* heres some info, talking about it having to be mm perfect www.sandsmuseum.com/cars/elise/information/technical/engalu.html

Edited by Paul RN on Thursday 24th August 22:34

Arno

349 posts

309 months

Friday 25th August 2006
quotequote all
Paul RN said:
The chasis cannot be repaired very easily and generally write off the car. I think they are around 9k from Lotus.


No, much cheaper.

AFAIK is a 'partial body assembly' (as Lotus calls it) you could use to re-chassis an Elise something like 3.5 to 4k or less at the moment. This is a complete chassis with crash box attached, windscreen surround, coolant pipes in chassis, etc. Ready to bolt on the rest of the stuff.

Re-chassis job is really not that expensive, especially if you can do the work your own and dont' have to pay the labour hours of a garage. Resulting car is probably better than the original ever was

Bye, Arno.

FuR1ous

28 posts

259 months

Friday 25th August 2006
quotequote all
Just finished a rechassis job.

Chassis is 3.5k + VAT but you do get a lot for your money as mentioned above and also includes side pods in primer and a new roll bar.
The high costs from a dealer is just the man hours to swap everything over. Don't underestimate the time and space you need.

If you want to save money on small expesive items like door seals, windscreen top rails, windscreen drip tray etc then it is time consuming to remove carefully.
Because it is a hand made car, not all of the holes in the new tub line up and need releiving.
I have taken the time to renew all suspension bushes, dampers and joints, done some tweaking to the engine and had a full respray.

I have enjoyed doing a complete rebuild and ended up with an as new S1 which looks great

hbaumhardt

950 posts

310 months

Friday 25th August 2006
quotequote all
Sounds like a lot of fun, can you estimate what the cost of the original + bits to make good were, and what you recon the value is now (I'm looking for a winter project !). hb

sp60

524 posts

290 months

Friday 25th August 2006
quotequote all
FuR1ous said:
Just finished a rechassis job.

Chassis is 3.5k + VAT but you do get a lot for your money as mentioned above and also includes side pods in primer and a new roll bar.
The high costs from a dealer is just the man hours to swap everything over. Don't underestimate the time and space you need.

If you want to save money on small expesive items like door seals, windscreen top rails, windscreen drip tray etc then it is time consuming to remove carefully.
Because it is a hand made car, not all of the holes in the new tub line up and need releiving.
I have taken the time to renew all suspension bushes, dampers and joints, done some tweaking to the engine and had a full respray.

I have enjoyed doing a complete rebuild and ended up with an as new S1 which looks great


Did you do this for yourself?
Are you a professional i.e. fully tooled up!
How long did it take?
Any idea of the cost of an S2 chassis?
Know what the weekends lottery numbers are?!!

Sorry for the barrage of questions, just interested in this idea.

cheers

james.

mac1967

205 posts

257 months

Friday 25th August 2006
quotequote all
Hi Furious,

This was for an S1...would it be the same cost from Lotus for an S2 would you know.

Regards,

Mac

mac1967

205 posts

257 months

Friday 25th August 2006
quotequote all
Hi again Furious...did you say the sills (pods) cum already attached too?

monkey boy 1

2,066 posts

262 months

Friday 25th August 2006
quotequote all
The Sills are bonded onto the Chassis, along with the Roll-over bar and rear bulkhead

anonymous-user

85 months

Friday 25th August 2006
quotequote all
Some good info here thanks, main reason for asking earlier is when I eventually get the car it will be for sprinting. One thing I have picked up is it's pretty difficult to bend chassis in the first place. Repairs depend on the type of damage I suppose...

Cheers FB.

FuR1ous

28 posts

259 months

Friday 25th August 2006
quotequote all
I bought what I thought was a slightly accident damaged S1 Elise (frontclam,windscreen, rad and crash box)but I was a bit green and it turned out to have some chassis damage. I could have had it welded up but I never would have trusted that it was going to be as good as possible.
I have built a couple of kit cars before so have a little mechanical knowlege and a have done a bit of fibreglass work.
The S1 chassis does come with side pods,windscreen surround and crash box bonded on. The water pipes,clutch hose and battery wiring harness are fitted as well, and a new roll bar fitted.
I don't know about an S2.
I could have sold it on but decided to make a nice S1 for keeping hence doing the suspension and a bit of engine work.

You do need space as it is not a 5 minute job and I took about 4 months but then I am self employed so cannot spend as much time in the garage as I would like.
I took my time and managed to source parts from small ads and ebay.

Nothing is very complicated, but I did not strip the old car completely first, rather take off one and transfer to to the new, that way it was all fresh in my mind.

I enjoyed the project and have come out with an S1 that looks like new but will still be worth less on the market for being a cat D.

I had not intended to go this route but was kind of forced on me so if you are going down this route the car would have to be the right price to start with.

sp60

524 posts

290 months

Saturday 26th August 2006
quotequote all
Thanks for the info...and fair play to you for doing the job properley rather than just trying to palm it off on another unsuspecting punter. Did you have no comeback on the person you bought it from in the first place?
I'd love to be able to complete a project like that...but I suspect I would feel differently if forced into it!

monkey boy 1

2,066 posts

262 months

Saturday 26th August 2006
quotequote all
The S2 would be the same as the S1 in it's construction. The obvous differences being what engine you want? K series or 'Yota. Different Sub frames

gooby

9,269 posts

265 months

Saturday 26th August 2006
quotequote all
Paul RN said:
The chasis cannot be repaired very easily and generally write off the car. I think they are around 9k from Lotus.

*edit* heres some info, talking about it having to be mm perfect www.sandsmuseum.com/cars/elise/information/technical/engalu.html

Edited by Paul RN on Thursday 24th August 22:34


Yeah!... When the BoLOCs did a factory tour we saw one being adjusted to mm perfect. It consisted of 4-5 of the largest blokes on the production floor and a sledge hammer. Highly technical...

FuR1ous

28 posts

259 months

Saturday 26th August 2006
quotequote all
sp60 said:
Thanks for the info...and fair play to you for doing the job properley rather than just trying to palm it off on another unsuspecting punter. Did you have no comeback on the person you bought it from in the first place?
I'd love to be able to complete a project like that...but I suspect I would feel differently if forced into it!


I took advice on getting comeback but we decided that even if won, getting money out of the scrote might be nigh on impossible.
I decided to leave it and put it down to life experience. Life is too short to spend worrying about a bit of money.
However if I meet the said person down a dark alley I might ammend my views.

I did feel a bit sour for a couple of months and so left it alone.
Once I got stuck into the project I just kept looking forward not back. Now I am really chuffed with it.
Yes, I could have bought a good one in the same condition for the same outlay but I have had the satisfaction of stripping the car down to every nut and bolt(bar the engine/box)and rebuiling it to a good standard and I have done it all myself.