Changing wheels/tyres
Changing wheels/tyres
Author
Discussion

simonk

Original Poster:

908 posts

256 months

Tuesday 29th August 2006
quotequote all
Ok some very basic questions from a mechanical numpty here....

Im going to buy a set of winter wheels/tyres so that I can use my A048s when it seems like a good idea but use something more cold/wet friendly when that seems more sensible.

What equipment do you guys who do this use? How do you jack the car up? What you do use to undo and redo the wheels nuts? How do you make sure you do them up to the correct settings?

Please keep answers nice and simple!

Thanks in advance.

Simon

shangani

3,069 posts

268 months

Tuesday 29th August 2006
quotequote all
Simon, it takes me 10 min.

You need:
1) A jack low enough to get under the car
2) A wrench for getting the wheelnuts off
3) Ideally a torque wrench for tightening them to the recommended S2 setting of 77lb/ft.

Steps:
1) Loosen all the wheelnuts
2) Jack up one side at the jacking point
3) Take the wheels off on that side and put the new wheels on. Make sure the tyre direction is correct.
4) Hand tighten the bolts
5) Let the jack down
6) Repeat for the other side
7) Torque all the bolts to 77 once the car is on terra firma.

Takes me exactly 12 min and I do it before and after every trackday.

cuzza

2,042 posts

284 months

Tuesday 29th August 2006
quotequote all
If you don't have a jack low enough, reverse the car onto a piece of wood (just the rear wheel), taht'll allow the jack to get under OK.

TonyHetherington

32,091 posts

281 months

Tuesday 29th August 2006
quotequote all
Yup I agree with exactly to a tee what the others have said above. Not for the purpose of changing sets, but more for cleaning (yes yes I know) I regularly take my wheels off and it's a piece of cake.

Also worth pointing out that the front jacking point raises the front wheel, the rear jacking point when raised high enough raises both the rear AND the front wheel - so you can change 1 whole side with only one jacking up.

Also, just to say, do it on a flat surface or get ourself a wheel chock to stop the car moving on the jack.

I bought the orange/blue RAC jack/axle stand/chock kit from Argos for about £30 I think it was as that had a lower entry point than the Halfords yellow one - have used it for well over a year now no probs!

simonk

Original Poster:

908 posts

256 months

Tuesday 29th August 2006
quotequote all
Thanks guys, exactly the sort of info i was looking for

Simon

S Works

10,166 posts

281 months

Tuesday 29th August 2006
quotequote all
Making friends on this place becomes rapidly more expensive... Simon, let me know when you make your decision on rims, this might be of interest to you:

http://wiki.seloc.org/index.php/S2_Wh

simonk

Original Poster:

908 posts

256 months

Tuesday 29th August 2006
quotequote all
S Works said:
Making friends on this place becomes rapidly more expensive... Simon, let me know when you make your decision on rims, this might be of interest to you:

http://wiki.seloc.org/index.php/S2_Wh


That is the truest thing i have read for a longgg time! rolleyes

Thanks for the link Tim, interesting.

I have been looking at a set of the lovely 240r wheels in black from Plans today cloud9

Trouble is im thinking they might be better with the A048s on and my current wheels with the wet/winter tyres on, probably A039s. This complicates things and runs the risk of ending up buying another set of the wheels come dry weather time next year yikes

Simon

boggy

4,603 posts

266 months

Tuesday 29th August 2006
quotequote all
simonk said:
S Works said:
Making friends on this place becomes rapidly more expensive... Simon, let me know when you make your decision on rims, this might be of interest to you:

http://wiki.seloc.org/index.php/S2_Wh


That is the truest thing i have read for a longgg time! rolleyes

Thanks for the link Tim, interesting.

I have been looking at a set of the lovely 240r wheels in black from Plans today cloud9

Trouble is im thinking they might be better with the A048s on and my current wheels with the wet/winter tyres on, probably A039s. This complicates things and runs the risk of ending up buying another set of the wheels come dry weather time next year yikes

Simon


How much are they it's only got them listed in $ do you have Plan's website? Also do the Exige Wheel's need spacer's or anything?

Boggy

simonk

Original Poster:

908 posts

256 months

Tuesday 29th August 2006
quotequote all
Hi Boggy

www.plansmotorsport.com/

The wheels arent on there but are £1700 inc vat i think.

Dont think they need any spacers to go on an exige.

Simon