No temperature?
Author
Discussion

buggs

Original Poster:

113 posts

250 months

Friday 1st September 2006
quotequote all
I seem not to be getting a temperature reading on my Speedo.

Will it be simple i.e. a loose connection, If so where is it located?

The car was serviced a couple of weeks ago!

kevin ritson

3,423 posts

258 months

Friday 1st September 2006
quotequote all
Silly question, but I take it the engine's running for more than 10 minutes?

buggs

Original Poster:

113 posts

250 months

Friday 1st September 2006
quotequote all
It only happened yesterday. I noticed it driving to and from work. The journey is about 45mins each way.

Edited by buggs on Friday 1st September 11:55

mr_c

2,508 posts

260 months

Friday 1st September 2006
quotequote all
probably just a sensor is busted or a wire's broken.

mrgrumpy

4 posts

257 months

Friday 1st September 2006
quotequote all
Check the wire to the temp sender wasn't pulled off during the service.
If it's a K series then the temp sender is on the large bore plumbing at the nearside end of the engine.
There are 2 senders, one for the ECU, the other for the gauge, they sit at right angles to each other, forget which is which, but it will be obvious if the wire is off.

Yee haa!

590 posts

247 months

Friday 1st September 2006
quotequote all
its the blue sender. happened to me a while back. its a fairly easy fix

Edited by Yee haa! on Friday 1st September 16:29