Clunking door…..
Clunking door…..
Author
Discussion

bing

Original Poster:

1,946 posts

269 months

Monday 4th September 2006
quotequote all
Folks my 05 111r has suddenly developed a 'clunking door' on the drivers side, it seems to take a 3-4 goes before to actually closes properly…anyone know what this is???

Is it a simple fix that can be done at home, I'd rather do that then treck down to the dealers for a warranty issue and be without a car for a day or two….

thanks

GRL

252 posts

255 months

Monday 4th September 2006
quotequote all
Does the offending door have a 'sticky' button? I mean, when you depress the button to open the door, does it pop back out cleanly or does it grab a little or stay depressed?

I had a similar problem on my 111R on the PAX door. Turned out that the alignment of the door button was way out and the bush had been destroyed. As the button sticks, it prevents the door mech from grabbing the striker pin and hence, the door bounces back, so to speak.

Simple cure was to replace the door bush and mech - all done under warranty by the dealer.

bing

Original Poster:

1,946 posts

269 months

Monday 4th September 2006
quotequote all
yep does exactly as you've said....sod it looks like another trip to the 'stealers'.....oh well at leat there's the warranty!!!!

GRL

252 posts

255 months

Monday 4th September 2006
quotequote all
Good-O! At least it's a simple, rectifiable problem. Just be sure to insist upon the mech REPLACEMENT. My dealer was told by Lotus to fit an alignment shim the first time I took it back in. My door button would stick in completely and had to be released by inserting the key and pulling the door button back out yikes The alignment shim helped the button back out but it was still sticking and eventually reverted to its fully depressed nature after a couple of weeks (a bit like it's owner). Car went in again and this time they replaced the whole mech and all was well...