Exige shell on S1 Elise?
Discussion
EliseParts sell the conversion. Basically I think all you need are the front and rear clams, the roof, engine cover and rear spoiler. There will be some other bits too. Oh, make sure you go to Exige 16" Front and 17" Rear wheels or it'll look odd.
You could also see if Maddog's (search for Maddog Motorsport) Exige clams are any cheaper.
You could also see if Maddog's (search for Maddog Motorsport) Exige clams are any cheaper.
Having delved into this a bit more, need a few more answers.
How difficult is it to change clams? How is the rear clam attached to the chassis? Anyone care to gauge how difficult it would be to replace by myself? Read a few comments that the exige clam is longer or fits differently...
Following on from that, anyone know if the whole lot needs to be replaced in one go to fit properly? I'm guessing not, because the doors are the same just seeking confirmation really.
Finally for the eliseparts kit, would the quality be similar to original lotus?
How difficult is it to change clams? How is the rear clam attached to the chassis? Anyone care to gauge how difficult it would be to replace by myself? Read a few comments that the exige clam is longer or fits differently...
Following on from that, anyone know if the whole lot needs to be replaced in one go to fit properly? I'm guessing not, because the doors are the same just seeking confirmation really.
Finally for the eliseparts kit, would the quality be similar to original lotus?
Seany88 said:
Having delved into this a bit more, need a few more answers.
How difficult is it to change clams? How is the rear clam attached to the chassis? Anyone care to gauge how difficult it would be to replace by myself? Read a few comments that the exige clam is longer or fits differently...
Following on from that, anyone know if the whole lot needs to be replaced in one go to fit properly? I'm guessing not, because the doors are the same just seeking confirmation really.
Finally for the eliseparts kit, would the quality be similar to original lotus?
How difficult is it to change clams? How is the rear clam attached to the chassis? Anyone care to gauge how difficult it would be to replace by myself? Read a few comments that the exige clam is longer or fits differently...
Following on from that, anyone know if the whole lot needs to be replaced in one go to fit properly? I'm guessing not, because the doors are the same just seeking confirmation really.
Finally for the eliseparts kit, would the quality be similar to original lotus?
a) depends how good you are with a spanner, loads of people remove their clams without a problem.
b) ask Geary @ Eliseparts as the kit goes over some of the existing parts by reading the spec.
c) ask Geary @ Eliseparts, although you're buying motorsport panels rather than lotus exige clams.
Don't forget you'll need it sprayed, prob about 1.5/2k on top.
Edited by Paul RN on Tuesday 19th September 21:52
I've emailed eliseparts now so will see what they say.
Another thing, does anyone think this is worth it? Its not just for aesthetics (although it mostly is
) but in the future i'd like to consider dropping a honda k20 in there too.
Should I wait for a std bashed-up elise to come along? As from that link posted by Janitor, they want £7500 bottom price (because its a 135 sport). All ideas and input appreciated.
Another thing, does anyone think this is worth it? Its not just for aesthetics (although it mostly is
) but in the future i'd like to consider dropping a honda k20 in there too. Should I wait for a std bashed-up elise to come along? As from that link posted by Janitor, they want £7500 bottom price (because its a 135 sport). All ideas and input appreciated.
Just found this:
[url]http://cgi.ebay.co.uk/ws/eBayISAPI.dl[/url]
Now that would be a bargain don't you think?
I realise it will still be an elise, but it gives me the opportunity to have it how I wanted it in the first place i.e. white! Plus I cannot afford an exige for a good few years.
I know this is a basic lazy question, but what are the actual differences between an elise and exige? As i seem to have got it into my head that an elise can be made to perform as well as an exige...?
[url]http://cgi.ebay.co.uk/ws/eBayISAPI.dl[/url]
Now that would be a bargain don't you think?
I realise it will still be an elise, but it gives me the opportunity to have it how I wanted it in the first place i.e. white! Plus I cannot afford an exige for a good few years.
I know this is a basic lazy question, but what are the actual differences between an elise and exige? As i seem to have got it into my head that an elise can be made to perform as well as an exige...?
those guys at Red Motorsport Germany have also some Exige clams for sale, see the list;
www.red-motorsport.de/html/body_schnappchen.html
GTRene
www.red-motorsport.de/html/body_schnappchen.html
GTRene
bogie said:
youre probably looking at £5K + of bits an spraying to do it...then youd want wheels etc...and thats if you do it yourself...and it would still be an Elise come resale time
IMO youd be better off selling the car and buying an Exige in the long term......
IMO youd be better off selling the car and buying an Exige in the long term......
Agreed. Remember that Red one with the TT conversion that was for sale last year for about £12/13k? Ripe for an SC Honda... was considering it until my car came up.
Gassing Station | Elise/Exige/Europa/340R | Top of Page | What's New | My Stuff



